17" or 18" nissan titan steel wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

demian5 · 07-25-2017, 11:15 AM

Anyone put 17" or 18" Nissan Titan steel wheels on a C10? Seems like they would work, just thought I'd ask to see if anyone has and what they look like. They may be too positive offset but I believe they are 8" wide.

**special-K** · 07-26-2017, 06:15 AM

I believe what you have now would be hard to beat. IMO, those Nissan wheels would be a step in a bad direction. You have a look not many have here...body color wide steelies w/caps. Very classy and custom in a subdued and tasteful way. It really works with the gold color especially.

hewittca · 07-26-2017, 10:32 AM

I have seen them on a few trucks and they look pretty good.

There's also the 20" versions if you want bigger. This thread has a few details about getting them to fit. Basically, you'll have to run spacers in the rear because of all the backspacing, and you will have to get the centers bored out to fit the c10 hubs if you still have drum brakes.

07-25-2017, 11:15 AM	#1
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,178	17" or 18" nissan titan steel wheels Anyone put 17" or 18" Nissan Titan steel wheels on a C10? Seems like they would work, just thought I'd ask to see if anyone has and what they look like. They may be too positive offset but I believe they are 8" wide. __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC

07-26-2017, 06:15 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 17" or 18" nissan titan steel wheels I believe what you have now would be hard to beat. IMO, those Nissan wheels would be a step in a bad direction. You have a look not many have here...body color wide steelies w/caps. Very classy and custom in a subdued and tasteful way. It really works with the gold color especially. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-26-2017, 10:32 AM	#3
hewittca Registered User Join Date: Jun 2014 Location: Mocksville, NC Posts: 1,767	Re: 17" or 18" nissan titan steel wheels I have seen them on a few trucks and they look pretty good. There's also the 20" versions if you want bigger. This thread has a few details about getting them to fit. Basically, you'll have to run spacers in the rear because of all the backspacing, and you will have to get the centers bored out to fit the c10 hubs if you still have drum brakes. __________________ Builds: Green Gus the 68 C10 \| Bluey the 72 1500 \| Lowly the 70 C10 - Instagram: @dr.hewitt - C10 Concept/Development Photos: Master Thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.