|
08-16-2017, 02:37 PM
|
#1 |
|
Registered User
Join Date: Jul 2013
Location: Converse, Texas
Posts: 103
|
Welding type
My driver's seat welds have broke where the seat frame meets the seat Trac. The upolstery is still in good condition since it was redone 15 years ago. Which form of welding would create less heat to weld or retack the broken welds. Since moving to San Antonio I need to research a shop that can fix the frame. Any help would be appreciated. Thanks in advance, my 71 Blazer would appreciate it too.. MikeD
|
|
|
|
08-16-2017, 03:41 PM
|
#2 |
|
Registered User
Join Date: Dec 2016
Location: Gulfport MS
Posts: 17
|
Re: Welding type
They could be MIG/TIG or spot welded.
__________________
Corey 1991  V3500
|
|
|
|
|
08-16-2017, 05:16 PM
|
#3 |
|
2WD Jimmy
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
|
Re: Welding type
Mig generates the least heat.
|
|
|
|
|
08-16-2017, 06:48 PM
|
#4 |
|
Registered User
Join Date: Jul 2013
Location: Converse, Texas
Posts: 103
|
Re: Welding type
Thank you gentleman for your help. I'll call around and see who can Might weld it here in SA.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
