A Good Start - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Johnny Outdoors · 04-13-2004, 10:46 PM

I GOT THE WHOLE BED OFF MY 67 THIS WEEKEND
THE SIDE PANELS HAVE TO BE REPLACED
AND ALL THE CROSS BED MOUNTS ARE GONE
HAS ANYONE TRIED TO BEND THEIR OWN?
I FIGURE 16 GAUGE METAL AND AN 8 FOOD BREAK SHOULD DO IT
HAS ANYONE TRIED THIS?

Johnny Outdoors · 04-13-2004, 10:47 PM

2

Johnny Outdoors · 04-13-2004, 10:48 PM

3

Johnny Outdoors · 04-13-2004, 10:49 PM

4

Perchjerker · 04-13-2004, 11:58 PM

Brother, you really have your work cut out for you. It might be easier to travel a little down south to find a better whole bed than that.

MOTHERTRUCKERS · 04-14-2004, 10:13 AM

We make our own bedsides and cross sills here, we order the stake pockets from another company.

Johnny Outdoors · 04-15-2004, 12:27 AM

HEY THANKS FOR THE INFO MOTHERTRUCKER

JimKshortstep4x4 · 04-15-2004, 08:23 AM

We make the cross members for our trucks. Living in Michigan, you have to replace lots of parts, so you learn to make stuff.

Good luck on your project.

Jim

04-13-2004, 10:46 PM	#1
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	A Good Start I GOT THE WHOLE BED OFF MY 67 THIS WEEKEND THE SIDE PANELS HAVE TO BE REPLACED AND ALL THE CROSS BED MOUNTS ARE GONE HAS ANYONE TRIED TO BEND THEIR OWN? I FIGURE 16 GAUGE METAL AND AN 8 FOOD BREAK SHOULD DO IT HAS ANYONE TRIED THIS? __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

04-13-2004, 10:47 PM	#2
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	2 __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

04-13-2004, 10:48 PM	#3
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	3 __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

04-13-2004, 10:49 PM	#4
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	4 __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

04-13-2004, 11:58 PM	#5
Perchjerker Beer Power!!!!!!!!!! Join Date: Nov 2003 Location: Nacogdoches, TX Posts: 280	Brother, you really have your work cut out for you. It might be easier to travel a little down south to find a better whole bed than that. __________________ Rather be fishin'

04-14-2004, 10:13 AM	#6
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We make our own bedsides and cross sills here, we order the stake pockets from another company. __________________ Rest in Peace Ed. Thanks for all the good times.

04-15-2004, 12:27 AM	#7
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	HEY THANKS FOR THE INFO MOTHERTRUCKER __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

04-15-2004, 08:23 AM	#8
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	We make the cross members for our trucks. Living in Michigan, you have to replace lots of parts, so you learn to make stuff. Good luck on your project. Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.