![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
almost scrap
![]() Join Date: Sep 2009
Location: Indiana
Posts: 130
|
72 chevy k series reverse light wire routing
I am working on my brothers 72 Chevy k series pickup and was wondering of the factory wire routing for the dark green/ light green wires for the reverse lights for a sm465 4 speed trans. I have an idea on how I am going to run them (probably along the speedo cable for cleanliness) but I wanted to know what the factory did, as the wiring was a little funky on this truck and I have nothing to go off of, and did not see anything in the service manual. I found some descriptions using a search but was wondering if there were any photos out there?
Thanks |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: 72 chevy k series reverse light wire routing
Only pic I have shows the wires dropping off the passenger side, I believe they run up the firewall then over to driver's side but don't know exact routing. I know the rear harness runs down the driver's frame rail, not sure how these wires get there.
('70 K20) |
![]() |
![]() |
![]() |
#3 |
almost scrap
![]() Join Date: Sep 2009
Location: Indiana
Posts: 130
|
Re: 72 chevy k series reverse light wire routing
excellent! that tells me a lot actually. Thanks B.W.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|