|
09-20-2017, 02:33 PM
|
#16 |
|
Registered User
Join Date: Jan 2013
Location: Buffalo Gap, TX
Posts: 230
|
Re: 700R4 build thread.
Using the TransGo Separator Plate, with a Corvette 2nd Servo Piston and a .500 Boost Valve..
Transgo says that with the bigger 2nd Piston, drill passages A and C to between .093" to .110". I understand the Corvette servo can give rough 1-2 shifts, would drilling these to the smaller end of the scale keep the shifting from being too harsh? Also, I think that passage A = 3rd gear Apply and C = 2nd gear apply, can anybody confirm that?
__________________
My Chevy Truck Project Build Thread '62 Ranchero - 200 I6, 3-on-the-tree, power nothing. '71 LeSabre - 455 Stage 1, power everything. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode