67 4x4 dually - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spartan · 09-04-2017, 08:24 PM

There's remnants of a 67 I've been driving by the last couple years.
It's a dual rear wheel 67. Yesterday I pulled to the side of the road to take a glance and notice the 4x4 hubs.

My understanding is that these didn't exist from the factory so either the 4x4 was added or the dual rear was added. It has marker lights too. Other than that I don't know what shape the truck is in but judge ing from the weeds around it... For at least 3 to 4 years.

My question isn't do they exist but did the factory make such a truck?
I think not but the memory isn't as good as it used to be.

I did a search but couldn't find the thread I know exists somewhere that says these were/were not made by the factory.

TIA
Spartan

Oh yeah... I'm going to see if I can't pry it out of the guy just for the front axel if nothing else.
Cheers!

**HO455** · 09-04-2017, 09:03 PM

It's possible that it could be a Napco conversion. Like these.

http://67-72chevytrucks.com/vboard/s...d.php?t=485292

http://67-72chevytrucks.com/vboard/s...d.php?t=195092

Spartan · 09-04-2017, 09:49 PM

I'm familiar with napco. Marmon Harrington would be another.
I have a few Napco conversion trucks out in the back 40.

My memory serves, it would have to be napco I guess. What threw me is it has factory hubs. So with that I'm guessing 3/4 ton 4x4 with dual rear swapped in.

Thanks for the links. It's been awhile since I drooled over some of those.
Cheers!

Spartan · 09-04-2017, 09:54 PM

I'm going to put the word out and maybe get the guys number. Out here just wandering around on somebody's property will get you introduced to castle doctrine if you aren't careful. Ill repost if it turns out to be anything special. Napco, 67 4x4, dually... None of them super common anymore. Thanks again.

**special-K** · 09-04-2017, 10:27 PM

Years ago, an excavating contractor for one building I contracted with said he had a '70 factory 4wd 1t. He also had a boatload of N.O.S. parts. I know through other people he was deep into these trucks, so knew what he was talking about. But I never saw it, so could have been a Napco with a misuse of the terms factory vs ordered new through dealer. The factory just plain didn't do it, but Howe and NAPCO were both in the silver book. It may have been a DRW C/20 with Napco conversion that used Budds up front.

I also have a friend with a body shop who about 15 years ago had a '68 4wd Stepside restoration he was looking for a bed to replace the original. I had a 8 footer and he said it needed to be 9'. I looked and it was a 1t 9' Stepside brush fire truck. I never looked at the front axle but assumed it was a C/30 Napco like I had. Mine was a cab & chassis from factory I bought with no bed and put a 9' Reading utility bed on.

I hope you get a chance to check it out. This is the kind of stuff I dig with these trucks

**HO455** · 09-05-2017, 09:33 AM

Quote:

Originally Posted by Spartan

I'm familiar with napco. Marmon Harrington would be another.
I have a few Napco conversion trucks out in the back 40.

My memory serves, it would have to be napco I guess. What threw me is it has factory hubs. So with that I'm guessing 3/4 ton 4x4 with dual rear swapped in.

Thanks for the links. It's been awhile since I drooled over some of those.
Cheers!

Here are two of my favorite threads for drooling. Good luck on the 67.

http://67-72chevytrucks.com/vboard/s...d.php?t=320260

http://67-72chevytrucks.com/vboard/s...d.php?t=316751

Spartan · 10-12-2017, 01:49 AM

So...
I drove by again and this time I decided to get a better look. It is a 67 c30 with what appear to be aftermarket marker lights. Didnt notice the markers originally. It indeed has factory 4wd hubs. They are exactly like my 69 so Im guessing 3/4 ton. Front rims have 8 bolt pattern. If I ever see the guy there I'm gonna ask...but theres about 15 vehicles and two are really nicely restored examples of early 50's cars. Theres also a 59 apache hidden behind a barn that I didnt notice from the road. I didnt go any further than the c30 tho just in case his security plan involves Smith & Wesson. So there it is...a c30 with 3/4 4wd swapped in.
mystery solved? maybe. I'll revisit this thread if I end up owning it.
cheers!

**special-K** · 10-12-2017, 06:27 AM

I'd like to see it and hope you can end up with it

tristan · 10-12-2017, 09:23 AM

Maybe you could look up the property record and send them a polite letter of inquiry regarding the truck? They probably won't fire upon the postal carrier.

**LockDoc** · 10-12-2017, 10:41 AM

-
If you got that close where's the pictures???....

LockDoc

09-04-2017, 08:24 PM	#1
Spartan Registered User Join Date: Dec 2012 Location: Backwoods, OR Posts: 888	67 4x4 dually There's remnants of a 67 I've been driving by the last couple years. It's a dual rear wheel 67. Yesterday I pulled to the side of the road to take a glance and notice the 4x4 hubs. My understanding is that these didn't exist from the factory so either the 4x4 was added or the dual rear was added. It has marker lights too. Other than that I don't know what shape the truck is in but judge ing from the weeds around it... For at least 3 to 4 years. My question isn't do they exist but did the factory make such a truck? I think not but the memory isn't as good as it used to be. I did a search but couldn't find the thread I know exists somewhere that says these were/were not made by the factory. TIA Spartan Oh yeah... I'm going to see if I can't pry it out of the guy just for the front axel if nothing else. Cheers! __________________ '69 K20 350/4 speed/Rockwell/D44/HO52. "orange rhymes with door hinge"

09-04-2017, 09:03 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,284	Re: 67 4x4 dually It's possible that it could be a Napco conversion. Like these. http://67-72chevytrucks.com/vboard/s...d.php?t=485292 http://67-72chevytrucks.com/vboard/s...d.php?t=195092 __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

09-04-2017, 09:49 PM	#3
Spartan Registered User Join Date: Dec 2012 Location: Backwoods, OR Posts: 888	Re: 67 4x4 dually I'm familiar with napco. Marmon Harrington would be another. I have a few Napco conversion trucks out in the back 40. My memory serves, it would have to be napco I guess. What threw me is it has factory hubs. So with that I'm guessing 3/4 ton 4x4 with dual rear swapped in. Thanks for the links. It's been awhile since I drooled over some of those. Cheers! __________________ '69 K20 350/4 speed/Rockwell/D44/HO52. "orange rhymes with door hinge"

09-04-2017, 09:54 PM	#4
Spartan Registered User Join Date: Dec 2012 Location: Backwoods, OR Posts: 888	Re: 67 4x4 dually I'm going to put the word out and maybe get the guys number. Out here just wandering around on somebody's property will get you introduced to castle doctrine if you aren't careful. Ill repost if it turns out to be anything special. Napco, 67 4x4, dually... None of them super common anymore. Thanks again. __________________ '69 K20 350/4 speed/Rockwell/D44/HO52. "orange rhymes with door hinge"

09-04-2017, 10:27 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 4x4 dually Years ago, an excavating contractor for one building I contracted with said he had a '70 factory 4wd 1t. He also had a boatload of N.O.S. parts. I know through other people he was deep into these trucks, so knew what he was talking about. But I never saw it, so could have been a Napco with a misuse of the terms factory vs ordered new through dealer. The factory just plain didn't do it, but Howe and NAPCO were both in the silver book. It may have been a DRW C/20 with Napco conversion that used Budds up front. I also have a friend with a body shop who about 15 years ago had a '68 4wd Stepside restoration he was looking for a bed to replace the original. I had a 8 footer and he said it needed to be 9'. I looked and it was a 1t 9' Stepside brush fire truck. I never looked at the front axle but assumed it was a C/30 Napco like I had. Mine was a cab & chassis from factory I bought with no bed and put a 9' Reading utility bed on. I hope you get a chance to check it out. This is the kind of stuff I dig with these trucks __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-12-2017, 01:49 AM	#7
Spartan Registered User Join Date: Dec 2012 Location: Backwoods, OR Posts: 888	Re: 67 4x4 dually So... I drove by again and this time I decided to get a better look. It is a 67 c30 with what appear to be aftermarket marker lights. Didnt notice the markers originally. It indeed has factory 4wd hubs. They are exactly like my 69 so Im guessing 3/4 ton. Front rims have 8 bolt pattern. If I ever see the guy there I'm gonna ask...but theres about 15 vehicles and two are really nicely restored examples of early 50's cars. Theres also a 59 apache hidden behind a barn that I didnt notice from the road. I didnt go any further than the c30 tho just in case his security plan involves Smith & Wesson. So there it is...a c30 with 3/4 4wd swapped in. mystery solved? maybe. I'll revisit this thread if I end up owning it. cheers! __________________ '69 K20 350/4 speed/Rockwell/D44/HO52. "orange rhymes with door hinge"

10-12-2017, 06:27 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 4x4 dually I'd like to see it and hope you can end up with it __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-12-2017, 09:23 AM	#9
tristan Registered User Join Date: Sep 2013 Location: Western PA Posts: 1,295	Re: 67 4x4 dually Maybe you could look up the property record and send them a polite letter of inquiry regarding the truck? They probably won't fire upon the postal carrier.

10-12-2017, 10:41 AM	#10
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,647	Re: 67 4x4 dually - If you got that close where's the pictures???.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.