|
11-22-2017, 01:13 AM
|
#1 |
|
Before and After
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
|
2K primer recoat
So I sprayed the interior of my stripped cab with 2K primer expecting to recoat and then spray the single stage color in a few hours as per the instruction sheet.
I got side tracked and it has been a few days, and I haven’t been able to get back to the spray gun. How thorough do I need to be in the sanding department before I spray again? Will it be different if I spray color, 1K or 2K primer over the existing 2K primer?
__________________
Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA |
|
|
|
11-22-2017, 01:39 AM
|
#2 |
|
Before and After
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
|
Re: 2K primer recoat
I’m just wondering about adhesion for the inside, since it is protected from the elements, would a red scotch bride be enough?
__________________
Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA |
|
|
|
|
11-22-2017, 07:02 AM
|
#3 |
|
Registered User
Join Date: Oct 2006
Location: Orland Park Il
Posts: 2,041
|
Re: 2K primer recoat
Hit it lightly with a grey scotchbrite pad and you're good to go regardless of what you plan to shoot.
__________________
68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback |
|
|
|
|
11-22-2017, 07:50 PM
|
#4 |
|
Registered User
Join Date: Jul 2012
Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!!
Posts: 537
|
Re: 2K primer recoat
yep, red is a little rough, stick with the grey scotchbright, make sure to get in the cracks and corners well as that is where you will likely have issues if not sanded thoroughly.
Remember, clean, clean, clean.....when you think you are done, do it again and you're 1/2 way there |
|
|
|
|
11-22-2017, 09:39 PM
|
#5 |
|
Registered User
Join Date: Dec 2010
Location: livingston co.mi
Posts: 2,471
|
Re: 2K primer recoat
If there is any peel in it you may want to sand that out.
__________________
California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project |
|
|
|
|
11-23-2017, 01:33 AM
|
#6 |
|
Account Suspended
 Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: 2K primer recoat
The product data sheet will explain the top coat window, it can be up to a week or so. I usually sand 2k no matter what but the manufacturers state it isn't necessary.
I always spray epoxy as a sealer before topcoats because it provides adhesion and shows flaws in your base. It does add spray work, wait time and such which can be tiring.... |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
