Anybody Redo Door Panels ??

[applebmw]

Anybody out there recover door panels? Or where to send them? To match leather bench seat..

[Smitty]

Had visors, seats, door panels, headliner done at a local upholstery shop. They have access to a large selection of materials. And could probably match the seat.

[notsolo]

Nailed It! Wow your upholstery guy did a fantastic job on that.

[Andy4639]

I've done 3 sets for my 71 & 67 both. 2 for the 71 & 1 for the 67. I bought 99 Tahoe seats and recovered them plus added heat to them. I also did the dash and steering wheel myself. The door panels I bought the backing board took it home made the pattern and then had the local upholstery guy cover them. I did the same thing to the 67 on the door panels not the other stuff.


What I have now in the 71.

[bs46488]

I currently do not have door panels, but bookmarked this ebay seller for a possibility when I look into putting some on.

https://www.ebay.com/usr/rrachal11

I guess they can make door panels in vinyl for $100. You could always contact them for other materials or options.

[Orence1]

Took the original panels, removed the raised section (1972) and had a friend re-upholster them. Also had the headliner done with a matching pattern.

[dflarsen77]

My regular steel door panels seem like they're bent inward. Is the mating surface supposed to basically be flat? I'd like to recover them but they're so wonky makes about 1/2' to an 1" gap between the handles and the panel. Thinking about just getting new ones.

[applebmw]

Originally Posted by bs46488

I currently do not have door panels, but bookmarked this ebay seller for a possibility when I look into putting some on.

https://www.ebay.com/usr/rrachal11

I guess they can make door panels in vinyl for $100. You could always contact them for other materials or options.

Thanks i sent him message

[applebmw]

Originally Posted by Smitty

Had visors, seats, door panels, headliner done at a local upholstery shop. They have access to a large selection of materials. And could probably match the seat.

That sharp looking

[greentruck]

I had this done to my 72 panels, dash pad and visors to match the buddy buckets. Board member crsweet91 did it. Don't know if he's still around. Haven't seen him post on here in along time.

[applebmw]

Originally Posted by bs46488

I currently do not have door panels, but bookmarked this ebay seller for a possibility when I look into putting some on.

https://www.ebay.com/usr/rrachal11

I guess they can make door panels in vinyl for $100. You could always contact them for other materials or options.

Contacted the guy on Ebay, sending him material, he going to make new panels with it for $60 plus shipping. Thanks. Turned into good find