Aluminum 205 shift boot hold down rings - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mekdad · 02-18-2009, 08:29 PM

ttt

6600DURAMAX · 02-19-2009, 09:03 AM

If you have any left for the 205 case I will take one, let me know

thanks

mekdad · 02-19-2009, 06:56 PM

Quote:

Originally Posted by 6600DURAMAX

If you have any left for the 205 case I will take one, let me know

thanks

If I run out I will make more.

PM me your e-mail and I will bill you with pay pal.

mekdad · 02-25-2009, 08:37 PM

ttt

mekdad · 03-03-2009, 05:41 PM

ttt

mekdad · 05-08-2009, 12:21 PM

ttt

**Dieselwrencher** · 11-17-2009, 12:38 AM

Are you still building these?

muscletrucks · 11-17-2009, 09:36 AM

If you have another one, I will take one as well.

mekdad · 11-27-2009, 01:50 PM

Quote:

Originally Posted by Dieselwrencher

Are you still building these?

Yes I am.

Quote:

Originally Posted by muscletrucks

If you have another one, I will take one as well.

PM sent.
Thanks,
Ken

**Thealien** · 11-27-2009, 03:11 PM

Any installed pics? I seem to remember someone else asked also. Pending installed pics I may want one.

muscletrucks · 11-27-2009, 05:22 PM

Payment sent.

mekdad · 11-30-2009, 08:00 PM

Part sent.

Thank you,
Ken

**Thealien** · 12-01-2009, 10:49 PM

anybody want to post a picture of one of these installed?

Please!

muscletrucks · 12-02-2009, 01:52 PM

Boot revieved, thank you, Rodney

mekdad · 12-02-2009, 08:02 PM

Quote:

Originally Posted by muscletrucks

Boot revieved, thank you, Rodney

You are welcome.

Could you post a installed pic for these guys for me?

Thanks,
Ken

budder71 · 12-02-2009, 09:58 PM

I will take one as well.. send me your paypal and I will send the money....

mekdad · 12-04-2009, 09:53 AM

Got it.
Part will be sent today.
Thank you,
Ken

**Thealien** · 12-12-2009, 07:15 AM

So is everyone hanging these on the wall or installing them? I would really apreciate an installed picture!

**Dieselwrencher** · 12-12-2009, 03:49 PM

I bet it looks like a billet aluminum ring holding down a shifter boot, but that is just me.

Just messing with ya.

**chevy71super** · 12-12-2009, 05:49 PM

I'm with ya, I would like to see an installed picture before purchasing.

Booya · 02-01-2012, 12:47 PM

Hi, I know this is an old thread, but do you have any left for the 205 case? Thanks

72LSK10 · 11-20-2015, 12:06 PM

Hi mekdad,
I tried to PM you but your mailbox is full. Are you still producing the 205 boot rings? If so, I'm interested in a couple of them, do you happen to make the rings for the SM465 shifter boot as well? Thank you, Eric.

**PICKMUP** · 11-20-2015, 12:44 PM

They don't do these automotive items any more. They did a lot of work for us, and finally just left us waiting for several large orders---unfilled! I do have a couple of the 465 rings left.

18Z · 03-23-2016, 04:49 PM

I know it's an old thread but by chance to you have anymore of these Aluminum 205 shift boot hold down rings. I am in Boise.

Dannyakers6772 · 01-02-2018, 09:33 PM

Are you still making these by any chance?

02-18-2009, 08:29 PM	#26
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 205 shift boot hold down rings ttt __________________ you never know what you can do until you have to undo something you have done!

02-19-2009, 09:03 AM	#27
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	Re: Aluminum 205 shift boot hold down rings If you have any left for the 205 case I will take one, let me know thanks __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years

02-25-2009, 08:37 PM	#29
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 205 shift boot hold down rings ttt __________________ you never know what you can do until you have to undo something you have done!

03-03-2009, 05:41 PM	#30
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 205 shift boot hold down rings ttt __________________ you never know what you can do until you have to undo something you have done!

05-08-2009, 12:21 PM	#31
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 205 shift boot hold down rings ttt __________________ you never know what you can do until you have to undo something you have done!

11-17-2009, 12:38 AM	#32
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Aluminum 205 shift boot hold down rings Are you still building these? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-17-2009, 09:36 AM	#33
muscletrucks Registered User Join Date: Mar 2008 Location: Kansas City Posts: 431	Re: Aluminum 205 shift boot hold down rings If you have another one, I will take one as well. __________________ 1972 GMC Sierra Grande 3/4 Ton 4x4 1970 Mercury Cougar XR7 1943 Farmall M

11-27-2009, 03:11 PM	#35
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Aluminum 205 shift boot hold down rings Any installed pics? I seem to remember someone else asked also. Pending installed pics I may want one.

11-27-2009, 05:22 PM	#36
muscletrucks Registered User Join Date: Mar 2008 Location: Kansas City Posts: 431	Re: Aluminum 205 shift boot hold down rings Payment sent. __________________ 1972 GMC Sierra Grande 3/4 Ton 4x4 1970 Mercury Cougar XR7 1943 Farmall M

11-30-2009, 08:00 PM	#37
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 205 shift boot hold down rings Part sent. Thank you, Ken __________________ you never know what you can do until you have to undo something you have done!

12-01-2009, 10:49 PM	#38
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Aluminum 205 shift boot hold down rings anybody want to post a picture of one of these installed? Please!

12-02-2009, 01:52 PM	#39
muscletrucks Registered User Join Date: Mar 2008 Location: Kansas City Posts: 431	Re: Aluminum 205 shift boot hold down rings Boot revieved, thank you, Rodney __________________ 1972 GMC Sierra Grande 3/4 Ton 4x4 1970 Mercury Cougar XR7 1943 Farmall M

12-02-2009, 09:58 PM	#41
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Aluminum 205 shift boot hold down rings I will take one as well.. send me your paypal and I will send the money....

12-04-2009, 09:53 AM	#42
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum 205 shift boot hold down rings Got it. Part will be sent today. Thank you, Ken __________________ you never know what you can do until you have to undo something you have done!

12-12-2009, 07:15 AM	#43
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Aluminum 205 shift boot hold down rings So is everyone hanging these on the wall or installing them? I would really apreciate an installed picture!



Register or Log In To remove these advertisements.

12-12-2009, 03:49 PM	#44
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Aluminum 205 shift boot hold down rings I bet it looks like a billet aluminum ring holding down a shifter boot, but that is just me. Just messing with ya. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 12-12-2009 at 03:49 PM.

12-12-2009, 05:49 PM	#45
chevy71super Registered User Join Date: Jan 2002 Location: So Cal Posts: 658	Re: Aluminum 205 shift boot hold down rings I'm with ya, I would like to see an installed picture before purchasing. __________________ 71 Cheyenne Super 4X4 SB 72 Cheyenne Super 4X4 SB 72 Cheyenne 4X4 SB

02-01-2012, 12:47 PM	#46
Booya Registered User Join Date: Jun 2008 Location: Boise Idaho Posts: 117	Re: Aluminum 205 shift boot hold down rings Hi, I know this is an old thread, but do you have any left for the 205 case? Thanks

11-20-2015, 12:06 PM	#47
72LSK10 Registered User Join Date: Oct 2011 Location: Long Beach, CA Posts: 127	Re: Aluminum 205 shift boot hold down rings Hi mekdad, I tried to PM you but your mailbox is full. Are you still producing the 205 boot rings? If so, I'm interested in a couple of them, do you happen to make the rings for the SM465 shifter boot as well? Thank you, Eric.

11-20-2015, 12:44 PM	#48
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Aluminum 205 shift boot hold down rings They don't do these automotive items any more. They did a lot of work for us, and finally just left us waiting for several large orders---unfilled! I do have a couple of the 465 rings left. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

03-23-2016, 04:49 PM	#49
18Z Registered User Join Date: Nov 2015 Location: Boise, Idaho Posts: 229	Re: Aluminum 205 shift boot hold down rings I know it's an old thread but by chance to you have anymore of these Aluminum 205 shift boot hold down rings. I am in Boise.

01-02-2018, 09:33 PM	#50
Dannyakers6772 Registered User Join Date: Jan 2018 Location: Tappahannock,va Posts: 2	Re: Aluminum 205 shift boot hold down rings Are you still making these by any chance?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.