|
01-08-2018, 02:16 AM | #1 |
Registered User
Join Date: Feb 2010
Location: gresham oregon
Posts: 806
|
Re: Fastfreddys 454ss
Here is a pic of the cantilever system by KP Components . You can run full exhaust diffently under the axle and maybe over the axle depending on you notch height.but you have to cut the frick out of your bed to get it to travel because of the steep step frame notch. This system is Also best to lay frame. Ridetech air bar is more for ride quality and only travels about 10 inches max
|
01-08-2018, 02:36 AM | #2 |
Registered User
Join Date: Feb 2010
Location: gresham oregon
Posts: 806
|
Re: Fastfreddys 454ss
Next things to get done coming up. Front disc conversion from pr proformance, front Ridetech cool ride and a Ridetech air pod that I am mounting in the bed
|
01-08-2018, 02:38 AM | #3 |
Registered User
Join Date: Feb 2010
Location: gresham oregon
Posts: 806
|
Re: Fastfreddys 454ss
AirPod Mocked up in the bed
|
01-08-2018, 02:51 AM | #4 |
Registered User
Join Date: Feb 2010
Location: gresham oregon
Posts: 806
|
Re: Fastfreddys 454ss
Most of you know custom parts are hard to find for the 1988 to 1998 trucks. Heres another hard to find part. It a instrument cluster made by ferreus industries to help out that ugly factory gauges. It comes in 16 colors, comes with double stick to stick to the surface (no cutting or mod is required) and they are about $30 on amazon
|
01-08-2018, 03:17 AM | #5 |
Registered User
Join Date: Feb 2010
Location: gresham oregon
Posts: 806
|
Re: Fastfreddys 454ss
Here’s information on a part I posted earlier. Speaker kick panels so you don’t have to cut up your doors for speakers. They are q-forms made by crutchfield and comes in 7 factory colors. May require bending by hand the e brake level,just watch the size of the speaker magnet and you will have to cut hole in the panel to fit speakers or order the ones with precut 5.25 speaker grilles.they are kinda expensive at $199 but they are good quality
|
01-08-2018, 03:23 AM | #6 |
Registered User
Join Date: Feb 2010
Location: gresham oregon
Posts: 806
|
Re: Fastfreddys 454ss
Here is pics of my kick panels again
|
01-08-2018, 03:49 AM | #7 |
Registered User
Join Date: Feb 2010
Location: gresham oregon
Posts: 806
|
Re: Fastfreddys 454ss
Another inexpensive thing to do to make the inside of you bed look better is spray can bed liner from Walmart it’s $6.50 a can and you will need about 8 cans. It’s the same stuff that oreillys sells for $12 a can.Make sure you scuff or sand the areas you want lined and don’t forget the tailgate, and deside if you want to include the stake pocket areas. Remember it is tuff to sand off and is permanent.good quality blue tape is best, don’t buy the Walmart stuff.cover the entire truck with that thin plastic 9 x 12 drop cloths ,even the wheels. This stuff can get everywhere. This stuff floats around for a little bit and will stick to any paint not covered.will require about 3 coats. Spray a light coat first let it get tacky and let each coat get tacky. The key is to not let it dry in between coats.dont spray it and let it dry over night and recoat it again or it won’t stick well. This spray liner works great and sticks and drys hard. I have used it on all my off road bumpers, rock gaurds and rocker panels. It’s never peeled or chipped. Buy a spray grip, your finger will thank you.
Last edited by fredscarryall; 01-08-2018 at 03:57 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|