Swap Radiators

[sprint_9]

I went cold case, mainly for two reasons. Stamped tanks and it was cheap. I worry about the cheap part because as you know you get what you pay for, but just looking at it I see no issues with it, so maybe it will be a good deal.

I found an aluminum fan shroud on ebay I hope to retro fit to my radiator and I plan on running Spal fans.

Not radiator specific but on fans. I ran into a problem with mine where I wanted a high flow Spal. I looked online and never really saw a fuse rating that it called for so I figured Id order it anyhow and go from there. I got it and it called for a 40 amp fuse. Not a big deal if you go direct to the battery but my LS harness has everything already built in, but fused to 30 amps. I want to use this part of my harness to keep things clean and orderly so I had to send that fan back and will probably end up with something a little less flow under 30 amps. Something to consider depending on how you are going to wire your fans.