|
04-27-2004, 11:21 PM
|
#1 |
|
Registered User
Join Date: Oct 2002
Location: West Des Moines, Ia
Posts: 3,233
|
dash harness?
how do i tell the difference between a wiring harness for a dummy light setup and one for a gauge setup, or is there a difference in them, i have been also been wondering if this could be the problem with my gas gauge, because i know the dash is grounded well, and i have checked all other possible things so could this be it also my passenger blinker light and my bright light marker are bass akwards
__________________
Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO |
|
|
|
04-28-2004, 08:57 PM
|
#2 |
|
SOON TO BE A STEP SIDE
Join Date: Apr 2004
Location: Little Valley, N.Y.
Posts: 169
|
I DONT KNOW THE DIFFERENCE FOR THE HARNESSES
BUT TO TEST YOUR GAS GAUGE TAKE A TEST LIGHT GROUND THE CLAMP END TOUCH THE TIP OF THE TEST LIGHT TO THE SENDER WIRE AT THE FUEL TANK WATCH YOUR GAS GAUGE IT SHOULD MOVE DO NOT USE A PIECE OF WIRE TO DO THIS YOU NEED THE RESISTANCE IN THE TEST LIGHT SO YOU DONT DAMAGE THE GAUGE
__________________
67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
