Mounting cab before paint? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Drew3 · 03-17-2018, 05:25 PM

Should I install my rubber cab mounts or just set the cab and bed on the frame? My truck was blasted while off the frame. Thanks for any help.
Posted via Mobile Device

Drew3 · 03-18-2018, 11:57 AM

Bump
Posted via Mobile Device

**HO455** · 03-18-2018, 12:15 PM

I'm not sure as to what you're asking. Do you want the bottom painted completely? If so then leave it off and lay it on its back so the painter can easily paint the bottom and firewall and likely some of the interior. But check with your painter to see what makes him happy.

**71CHEVYSHORTBED402** · 03-18-2018, 01:13 PM

At this point we're planning to spray the bottom, mount and paint. Just have to tape things off.

harpo231 · 03-18-2018, 01:17 PM

Painted mine off frame....

http://67-72chevytrucks.com/vboard/a...1&d=1521393380

Drew3 · 03-18-2018, 01:29 PM

My truck was blasted top to bottom. I’m just asking should I install bushing now or wait till after the whole truck is painted underside included.
Posted via Mobile Device

darrellyates · 03-18-2018, 01:43 PM

I would put the various bushings in. If any alignment or questions come up, it's sitting at the correct ride height. If you do any painting, you can clean the paint off the rubber parts, or if you're going to that much expense (painting top and bottom) and extra set of bushings is a negligible cost. Just my thoughts...

**HO455** · 03-18-2018, 02:10 PM

Are you planning on treating the insides of the voids under the floor? If so I would do that, then paint it off the frame, and then put it on the frame.

B. W. · 03-18-2018, 02:18 PM

More than one way to do it, pros & cons to each. I suggest you mount the cab, doors, fenders, hood, cowl & grille so you can shim everything for proper fit BEFORE you paint it. Then you can blow it back apart to paint.

Or, you can paint the insides/undersides, assemble it, leave it together & spray the outside as one piece.

Solid color I'd blow apart, metallic I'd spray with truck assembled. This is just me though, spray it how you feel comfortable.

Side note: I enjoy cut & buff more when it's blown apart because it's easier to clean the compound out of the nooks & crannies. (if "enjoy" is the right word)

67chevemall · 03-20-2018, 01:59 PM

Quote:

Originally Posted by harpo231

Painted mine off frame....

http://67-72chevytrucks.com/vboard/a...1&d=1521393380

Minty shop man. I would never leave except to get beer

03-17-2018, 05:25 PM	#1
Drew3 Registered User Join Date: Sep 2016 Location: Lexington, Ky Posts: 71	Mounting cab before paint? Should I install my rubber cab mounts or just set the cab and bed on the frame? My truck was blasted while off the frame. Thanks for any help. Posted via Mobile Device

03-18-2018, 11:57 AM	#2
Drew3 Registered User Join Date: Sep 2016 Location: Lexington, Ky Posts: 71	Re: Mounting cab before paint? Bump Posted via Mobile Device

03-18-2018, 12:15 PM	#3
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,350	Re: Mounting cab before paint? I'm not sure as to what you're asking. Do you want the bottom painted completely? If so then leave it off and lay it on its back so the painter can easily paint the bottom and firewall and likely some of the interior. But check with your painter to see what makes him happy. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

03-18-2018, 01:13 PM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,322	Re: Mounting cab before paint? At this point we're planning to spray the bottom, mount and paint. Just have to tape things off. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

03-18-2018, 01:17 PM	#5
harpo231 Registered User Join Date: Nov 2014 Location: Lincoln City DE Posts: 1,292	Re: Mounting cab before paint? Painted mine off frame.... http://67-72chevytrucks.com/vboard/a...1&d=1521393380 Attached Images __________________ Stan 67 swb BLU MULE posted via flip-fone

03-18-2018, 01:29 PM	#6
Drew3 Registered User Join Date: Sep 2016 Location: Lexington, Ky Posts: 71	Re: Mounting cab before paint? My truck was blasted top to bottom. I’m just asking should I install bushing now or wait till after the whole truck is painted underside included. Posted via Mobile Device

03-18-2018, 01:43 PM	#7
darrellyates Registered User Join Date: Jul 2016 Location: Gallatin TN Posts: 376	Re: Mounting cab before paint? I would put the various bushings in. If any alignment or questions come up, it's sitting at the correct ride height. If you do any painting, you can clean the paint off the rubber parts, or if you're going to that much expense (painting top and bottom) and extra set of bushings is a negligible cost. Just my thoughts...

03-18-2018, 02:10 PM	#8
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,350	Re: Mounting cab before paint? Are you planning on treating the insides of the voids under the floor? If so I would do that, then paint it off the frame, and then put it on the frame. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

03-18-2018, 02:18 PM	#9
B. W. Registered User Join Date: Nov 2014 Location: Bigfork, Montana Posts: 1,137	Re: Mounting cab before paint? More than one way to do it, pros & cons to each. I suggest you mount the cab, doors, fenders, hood, cowl & grille so you can shim everything for proper fit BEFORE you paint it. Then you can blow it back apart to paint. Or, you can paint the insides/undersides, assemble it, leave it together & spray the outside as one piece. Solid color I'd blow apart, metallic I'd spray with truck assembled. This is just me though, spray it how you feel comfortable. Side note: I enjoy cut & buff more when it's blown apart because it's easier to clean the compound out of the nooks & crannies. (if "enjoy" is the right word)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.