The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-23-2018, 11:25 PM   #1
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,926
Re: 55 - 59 Front Fenders

what pillar part are you looking for? front lower hinge pillar? thats what usually rusts out, but if that is the case look harder in the whole area because there is likely more to it than just a single hinge pillar. take off the little vertical panel just inside the door, on the rear of the kick panel by the door opening, and look down inside there for rotten areas. also take the grille off the floor evnt, open the vent or remove the flapper door and look inside the cowl through the opening. maybe use a mirror to see deep inside. there is a drain at the bottom visible when the fender is foff or from underneath. it plugs and then water builds up till it spills out of the floor and starts to rot stuff out. floor, front cab ounts, hinge pillar and related parts attached, step and rocker etc. pretty common and lots of guys just replace the lower parts instead of the whole pillar. also check the eyebrow area above the windshield for soft spots and areas above the roof gutter.
dsraven is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com