Wiper linkage retaining clip

[billinthehills]

Anyone know where I can find the clip that holds the wiper linkage on motor arm under cowl like one in picture? Mine is missing and haven't been able to find correct one. Ordered one online and received today but diameter of hole is too small so back to square one.Any help would be appreciated.

[LockDoc]

Originally Posted by billinthehills

Anyone know where I can find the clip that holds the wiper linkage on motor arm under cowl like one in picture? Mine is missing and haven't been able to find correct one. Ordered one online and received today but diameter of hole is too small so back to square one.Any help would be appreciated.

Not sure what you mean by the diameter of the hole is too small. The clip slides onto the head of the pin from the side. If the slot is too narrow take a dremel and widen it out some so it fits.

LockDoc

[billinthehills]

Originally Posted by LockDoc

Not sure what you mean by the diameter of the hole is too small. The clip slides onto the head of the pin from the side. If the slot is too narrow take a dremel and widen it out some so it fits.

LockDoc

Appreciate the response. The diameter of clip I received is too small and not enough there to open hole. Supposed to be for Gm 60 and up but not even close so am back to looking. The pic. I posted is of another truck I found for refrence with correct clip I am trying to find.

[LockDoc]

Originally Posted by billinthehills

Appreciate the response. The diameter of clip I received is too small and not enough there to open hole. Supposed to be for Gm 60 and up but not even close so am back to looking. The pic. I posted is of another truck I found for refrence with correct clip I am trying to find.

OK, try this. Posted by member JimKshortstep4x4.

Classic Parts have the clips. Wiper Transmission Arm Clip, PN 67-775 @ .89 each

http://www.classicparts.com

I am sure other vendors carry the clips, also.

Jim

LockDoc
__________________

[billinthehills]

Appreciate the help. They aren't showing that Part# online but fixing to give them a call. Thanks again.

[LockDoc]

Originally Posted by billinthehills

Appreciate the help. They aren't showing that Part# online but fixing to give them a call. Thanks again.

No problem. Let us know what happens.

LockDoc

[billinthehills]

Originally Posted by LockDoc

No problem. Let us know what happens.

LockDoc

Guy I talked to said no longer available. Have a list of vendors on my home computer. Will just have to get to searching.

[LockDoc]

Originally Posted by billinthehills

Guy I talked to said no longer available. Have a list of vendors on my home computer. Will just have to get to searching.

That's too bad.

If you can come up with a GM part number and have a dealership close, you might try them. If they don't have any they can can tell you if there are any dealerships in the US that might. If your GM parts guy won't cooperate PM me the part number. I will do some looking too.

Also, you might find one on the '67-'72 parts board. You can't post a want to buy but if you see one for sale you can buy it.....

LockDoc

[billinthehills]

Originally Posted by LockDoc

That's too bad.

If you can come up with a GM part number and have a dealership close, you might try them. If they don't have any they can can tell you if there are any dealerships in the US that might. If your GM parts guy won't cooperate PM me the part number. I will do some looking too.

Also, you might find one on the '67-'72 parts board. You can't post a want to buy but if you see one for sale you can buy it.....

LockDoc

Part # would be nice but haven't had much luck otherwise I could cross reference it. easy enough and looking at them online is tough because no way to determine size of pic.. Got another one coming from Ebay from Gentleman who sold me wrong one. Not sure what it is for but supposed to have bigger diameter hole in it so hopefully it will work. We will see. If not I will go to the parts board. Thanks again for all the info.

[Jeff's bowtie's]

I got your pm with address and I'll send one to you free of charge!!! I posted here earlier but thought I edited it but must have deleted it but no worries I'll send you one ..... Jeff

[billinthehills]

Originally Posted by Jeff's bowtie's

I got your pm with address and I'll send one to you free of charge!!! I posted here earlier but thought I edited it but must have deleted it but no worries I'll send you one ..... Jeff

Thanks so much Jeff and good looking out.

[Jeff's bowtie's]

I found this one I'll get it in the mail later today thanks

[LockDoc]

Originally Posted by Jeff's bowtie's

I found this one I'll get it in the mail later today thanks

Good deal Jeff! That is what makes this board one of the best on the net....

LockDoc

[Jeff's bowtie's]

Originally Posted by LockDoc

Good deal Jeff! That is what makes this board one of the best on the net....

LockDoc

Thanks Leon for the kind words

[billinthehills]

Originally Posted by Jeff's bowtie's

I found this one I'll get it in the mail later today thanks

Right on Jeff!!! Very much appreciated and i will be sure to pay it forward. Thanks again!! This forum and the folks on it are and have always been the best.

[Jeff's bowtie's]

Your welcome & The clip is on the way!!!!

[Jeff's bowtie's]

Originally Posted by Jeff's bowtie's

Your welcome & The clip is on the way!!!!

Did the clip make it yet !!!