LS swappers, post up your pics!! - Page 28 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69BUCKET · 03-21-2018, 02:18 PM

Getting there...

brownge · 03-21-2018, 10:54 PM

Not sure what you're asking. I bought the hydroboost unit from O'Reilly. I think it was a refurbed Astro van unit from early 90's. It is mounted upside down so the lines go to the bottom.

60apache · 04-01-2018, 10:59 PM

Quote:

Originally Posted by brownge

Not sure what you're asking. I bought the hydroboost unit from O'Reilly. I think it was a refurbed Astro van unit from early 90's. It is mounted upside down so the lines go to the bottom.

where did you get your brackets to mount it?

brownge · 04-02-2018, 09:20 PM

Quote:

Originally Posted by 60apache

where did you get your brackets to mount it?

I bought those from another board member - Captainfab. He does great work. I bought the power booster bracket and hydroboost mounting plate.

http://www.67-72chevytrucks.com/vboa...d.php?t=347484
http://www.67-72chevytrucks.com/vboa...d.php?t=347480

jessemthompson · 04-06-2018, 10:30 PM

Since my swap thread lost all its pics

z71se · 04-07-2018, 02:00 AM

Quote:

Originally Posted by jessemthompson

Since my swap thread lost all its pics

Really really nice. Love the L92 engine cover, no unnecessary wires, and the Chevy orange. I plan to do mine similarly. Thanks for the ideas!

1slowM6 · 04-08-2018, 04:51 PM

Quote:

Originally Posted by 69restomod

My turbo 6.0 4l80 combo work in progress!

Did you have to run a high hump or anything to run the 80e?

1slowM6 · 04-08-2018, 04:54 PM

Quote:

Originally Posted by Captainab

New truck harness and holleys dominator system

What kit did you buy for the fuel system?i have only been able to find the setup with the fpr that only goes to 15psi

Ghost's68 · 04-23-2018, 06:10 PM

As it sits right now.....

332rick · 04-23-2018, 06:56 PM

Progress update on my swap!

Reed123 · 06-26-2018, 10:45 AM

2006 6.0 w/ 4L80E trans putting in my 1971 SWB C-10

RockhoundII · 06-28-2018, 05:32 PM

My work in progress. 2002 lq4 into a 79 Blazer. Still have a long way to go.
http://67-72chevytrucks.com/vboard/s...d.php?t=765788

**doug_p** · 08-03-2018, 01:15 PM

62 LBFS LQ4/4L80E, with torsion bars still in place-

**doug_p** · 08-03-2018, 01:22 PM

Hey 67chevySupercharged, what kind of mods were required on the headers with the 4l80? I read somewhere with the 4l80, the Doug Thorley headers needed some grinding?
Thanks-
Doug

davecarney2 · 08-04-2018, 08:21 AM

Here's mine as it sits right now. 2003 6.0. 4L80E. Where's everyone getting their trans cooler lines and power steering lines and fittings. I'm running a mustang power rack and my radiator has a built in trans cooler

davecarney2 · 08-04-2018, 08:33 AM

Quote:

Originally Posted by Mjminino

Just added AC, and recently added rack and pinion.

Looks like were running the same rack anemic pinion. Where did you get your power steering lines?

**doug_p** · 08-04-2018, 08:38 AM

I had the pressure side line made locally at a hydraulic hose supply house. The return line I just used what was existing (truck had ps when I bought it).
DP

bears_den_customs · 08-05-2018, 09:13 PM

just finish my 5.3 swap in my 72 c10. Just getting started on my engine cover Name: IMG-1597108167.jpg
Views: 1829
Size: 56.6 KB

bears_den_customs · 08-05-2018, 09:22 PM

my 4.8 swapped 50 suburban. Name: 1950-chevy-3100-suburban-engine.jpg
Views: 1907
Size: 42.3 KB

Root2812 · 08-06-2018, 04:02 PM

Quote:

Originally Posted by bears_den_customs

my 4.8 swapped 50 suburban.Attachment 1808711

That looks great! What did you do for steering column and linkage? Did you recess the firewall at all? I'd love to see a few pictures of your steering linkage and radiator fan and shroud.

verdell · 08-06-2018, 05:19 PM

Quote:

Originally Posted by doug_p

62 LBFS LQ4/4L80E, with torsion bars still in place-

Which engine mounts did you use?

bears_den_customs · 08-06-2018, 07:06 PM

Quote:

Originally Posted by Root2812

That looks great! What did you do for steering column and linkage? Did you recess the firewall at all? I'd love to see a few pictures of your steering linkage and radiator fan and shroud.

here some pics 77 gm van column. 71 camaro clipped and no i didin't recess the firewall

Name: 20180806_175109.jpg
Views: 1721
Size: 43.5 KB

Name: 20180806_175152.jpg
Views: 1776
Size: 38.5 KB

Name: 20180806_175050.jpg
Views: 1824
Size: 46.5 KB

jrusher · 08-31-2018, 10:49 AM

Just finished mine up , little more tuning left to do Glad to be driving it again I started ls swap in April but ended up pulling cab and replacing floor and repaired all other rusted areas.

**1971Stepside** · 09-04-2018, 12:17 PM

So far to go, but excited about the progress.

**DaHos** · 09-14-2018, 09:48 AM

She's DONE !!!

03-21-2018, 02:18 PM	#676
69BUCKET Registered User Join Date: Oct 2017 Location: Newton Posts: 216	Re: LS swappers, post up your pics!! Getting there... Attached Images

03-21-2018, 10:54 PM	#677
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: LS swappers, post up your pics!! Not sure what you're asking. I bought the hydroboost unit from O'Reilly. I think it was a refurbed Astro van unit from early 90's. It is mounted upside down so the lines go to the bottom.

04-06-2018, 10:30 PM	#680
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 957	Re: LS swappers, post up your pics!! Since my swap thread lost all its pics Attached Images

04-23-2018, 06:10 PM	#684
Ghost's68 Registered User Join Date: Jun 2016 Location: American Canyon, CA Posts: 253	Re: LS swappers, post up your pics!! As it sits right now.....

04-23-2018, 06:56 PM	#685
332rick Registered User Join Date: Oct 2015 Location: Chula Vista, CA. Posts: 73	Re: LS swappers, post up your pics!! Progress update on my swap! Attached Images

06-26-2018, 10:45 AM	#686
Reed123 Registered User Join Date: Apr 2017 Location: Troy, TN Posts: 8	Re: LS swappers, post up your pics!! 2006 6.0 w/ 4L80E trans putting in my 1971 SWB C-10 Attached Images

06-28-2018, 05:32 PM	#687
RockhoundII Registered User Join Date: May 2016 Location: Oregon Posts: 97	Re: LS swappers, post up your pics!! My work in progress. 2002 lq4 into a 79 Blazer. Still have a long way to go. http://67-72chevytrucks.com/vboard/s...d.php?t=765788 Attached Images

08-03-2018, 01:15 PM	#688
doug_p Junior Member Join Date: Sep 2014 Location: Yorktown, VA Posts: 94	Re: LS swappers, post up your pics!! 62 LBFS LQ4/4L80E, with torsion bars still in place- Attached Images

08-03-2018, 01:22 PM	#689
doug_p Junior Member Join Date: Sep 2014 Location: Yorktown, VA Posts: 94	Re: LS swappers, post up your pics!! Hey 67chevySupercharged, what kind of mods were required on the headers with the 4l80? I read somewhere with the 4l80, the Doug Thorley headers needed some grinding? Thanks- Doug

08-04-2018, 08:21 AM	#690
davecarney2 Registered User Join Date: Jun 2012 Location: Catawba NC Posts: 230	Re: LS swappers, post up your pics!! Here's mine as it sits right now. 2003 6.0. 4L80E. Where's everyone getting their trans cooler lines and power steering lines and fittings. I'm running a mustang power rack and my radiator has a built in trans cooler Attached Images __________________ Bagged 1959 GMC 1969 C-30 dump My 59 build. http://67-72chevytrucks.com/vboard/s...d.php?t=592878 Last edited by davecarney2; 08-04-2018 at 08:28 AM.

08-04-2018, 08:38 AM	#692
doug_p Junior Member Join Date: Sep 2014 Location: Yorktown, VA Posts: 94	Re: LS swappers, post up your pics!! I had the pressure side line made locally at a hydraulic hose supply house. The return line I just used what was existing (truck had ps when I bought it). DP

08-05-2018, 09:13 PM	#693
bears_den_customs Registered User Join Date: Jul 2014 Location: jamestown tn Posts: 21	Re: LS swappers, post up your pics!! just finish my 5.3 swap in my 72 c10. Just getting started on my engine cover

08-05-2018, 09:22 PM	#694
bears_den_customs Registered User Join Date: Jul 2014 Location: jamestown tn Posts: 21	Re: LS swappers, post up your pics!! my 4.8 swapped 50 suburban.

08-31-2018, 10:49 AM	#698
jrusher Registered User Join Date: Mar 2017 Location: Edmonton Posts: 369	Re: LS swappers, post up your pics!! Just finished mine up , little more tuning left to do Glad to be driving it again I started ls swap in April but ended up pulling cab and replacing floor and repaired all other rusted areas. Attached Images

09-04-2018, 12:17 PM	#699
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: LS swappers, post up your pics!! So far to go, but excited about the progress. Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."



Register or Log In To remove these advertisements.

09-14-2018, 09:48 AM	#700
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: LS swappers, post up your pics!! She's DONE !!! Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.