IA 292 -4 wd rs motor mount ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wahl4m · 05-22-2018, 12:14 PM

anybody got a 64-66 right side frame motor mount for a 4 wd truck ? i never seen one ! even a pic would help ?? thanks

**aerotruk63** · 05-22-2018, 04:17 PM

I have one. Just picked up a 66 frame , but I just left for Montana if you can be patient. Be back in 10 days or so.

wahl4m · 05-22-2018, 09:08 PM

anybody got a 64-66 right side frame motor mount for a 4 wd truck with a 292 motor? i never seen one ! even a pic would help ?? thanks[/QUOTE]

padresag · 05-22-2018, 11:29 PM

ron

wahl4m · 05-23-2018, 05:49 AM

pm me a price -if for sale ?? this is for a 4 wd-64-66 truck with a 292 ?? i understand the right side is differant ?? and a 2 wd is differant ??? thanks mike wahl4m@aol.com

padresag · 05-23-2018, 03:07 PM

Quote:

Originally Posted by wahl4m

pm me a price -if for sale ?? this is for a 4 wd-64-66 truck with a 292 ?? i understand the right side is differant ?? and a 2 wd is differant ??? thanks mike wahl4m@aol.com

sorry you did ask for a picture and is all that i have for you
ron

wahl4m · 05-23-2018, 05:18 PM

OK -i wasnt sure ? im trying to figure out what i need for a 292 in a 4x4 carryall i have ? mi9ght just but another smaller 6 cyl for it ?? thanks guy

padresag · 05-23-2018, 05:46 PM

the 230/250 will fit the the sbc r/s perch. there is an alternative though. a 4 x 4 crossmember from a 67-72 that had a 292 i6 in it will work and will actually stifffen the frame in that area esp. at the steering box. here is a picture of one installed in a 64 for a sbc

ron

1960chevypanel · 05-24-2018, 02:14 AM

I have an extra pair, will post pics tomorrow

1960chevypanel · 05-25-2018, 03:39 PM

Here you go, they're media blasted and powder coated

wahl4m · 05-25-2018, 08:35 PM

just cking again ?? -these are for a 4-66& a 4 wd with a 292 ?? everyone i talked to said the right one is offset for the 292 ? somebody posted the later crossmember out of a 68-72 -4 wd ? it looks neat -BUT probably hard to find ? anyway ,what do you want for your mounts ? they sure look good -no clean to do! thanks

1960chevypanel · 05-26-2018, 02:11 AM

This truck was a roller, no engine when I got it. So I'm not sure. The mounts look identical except there's a left and a right. Ron do these look right for 292?

**aerotruk63** · 05-26-2018, 05:27 AM

No , they are for the inline 230-250 or V8.

1960chevypanel · 05-26-2018, 11:38 AM

Thanks aero, makes sense since they're uniform

wahl4m · 05-26-2018, 12:14 PM

thanks guys!!!!!! keep the info coming ! i might try tofind the crossmember style ??

05-22-2018, 12:14 PM	#1
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	292 -4 wd rs motor mount ?? anybody got a 64-66 right side frame motor mount for a 4 wd truck ? i never seen one ! even a pic would help ?? thanks

05-22-2018, 04:17 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 292 -4 wd rs motor mount ?? I have one. Just picked up a 66 frame , but I just left for Montana if you can be patient. Be back in 10 days or so. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

05-22-2018, 09:08 PM	#3
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: 292 -4 wd rs motor mount ?? anybody got a 64-66 right side frame motor mount for a 4 wd truck with a 292 motor? i never seen one ! even a pic would help ?? thanks[/QUOTE]

05-22-2018, 11:29 PM	#4
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: 292 -4 wd rs motor mount ?? ron

05-23-2018, 05:49 AM	#5
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: 292 -4 wd rs motor mount ?? pm me a price -if for sale ?? this is for a 4 wd-64-66 truck with a 292 ?? i understand the right side is differant ?? and a 2 wd is differant ??? thanks mike wahl4m@aol.com

05-23-2018, 05:18 PM	#7
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: 292 -4 wd rs motor mount ?? OK -i wasnt sure ? im trying to figure out what i need for a 292 in a 4x4 carryall i have ? mi9ght just but another smaller 6 cyl for it ?? thanks guy

05-23-2018, 05:46 PM	#8
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: 292 -4 wd rs motor mount ?? the 230/250 will fit the the sbc r/s perch. there is an alternative though. a 4 x 4 crossmember from a 67-72 that had a 292 i6 in it will work and will actually stifffen the frame in that area esp. at the steering box. here is a picture of one installed in a 64 for a sbc ron

05-24-2018, 02:14 AM	#9
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: 292 -4 wd rs motor mount ?? I have an extra pair, will post pics tomorrow

05-25-2018, 03:39 PM	#10
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: 292 -4 wd rs motor mount ?? Here you go, they're media blasted and powder coated Attached Images

05-25-2018, 08:35 PM	#11
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: 292 -4 wd rs motor mount ?? just cking again ?? -these are for a 4-66& a 4 wd with a 292 ?? everyone i talked to said the right one is offset for the 292 ? somebody posted the later crossmember out of a 68-72 -4 wd ? it looks neat -BUT probably hard to find ? anyway ,what do you want for your mounts ? they sure look good -no clean to do! thanks

05-26-2018, 02:11 AM	#12
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: 292 -4 wd rs motor mount ?? This truck was a roller, no engine when I got it. So I'm not sure. The mounts look identical except there's a left and a right. Ron do these look right for 292?

05-26-2018, 05:27 AM	#13
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 292 -4 wd rs motor mount ?? No , they are for the inline 230-250 or V8. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

05-26-2018, 11:38 AM	#14
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: 292 -4 wd rs motor mount ?? Thanks aero, makes sense since they're uniform

05-26-2018, 12:14 PM	#15
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: 292 -4 wd rs motor mount ?? thanks guys!!!!!! keep the info coming ! i might try tofind the crossmember style ??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.