IN WTB or trade - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70STOVEBOLT** · 05-02-2018, 05:02 PM

I think it will work for both, there is an adapter with it. The model number is 454TD so it should be for a tall deck. Here are some pics:

**70STOVEBOLT** · 05-02-2018, 05:22 PM

Quote:

Originally Posted by halfgassed

Dominator flange or 4150? Just want to clarify yours is for a tall deck correct?
I have a edelbrock performer rpm ,oval port, qjet bolt pattern id trade

Is yours new or used? Pics?

halfgassed · 05-03-2018, 12:20 AM

Used, is been stripped and painted and cleared a grayish/silver. I currently have it on a engine back in the corner of the garage, I can get ya a pic in the next day or two

**70STOVEBOLT** · 05-03-2018, 07:44 AM

Ok, I will wait for pics

halfgassed · 05-09-2018, 06:25 PM

Sorry for the delay, got busy.

**70STOVEBOLT** · 05-11-2018, 04:37 PM

Any issues with the manifold? What type of engine have you run it on?

halfgassed · 05-12-2018, 09:15 AM

Got it from a buddy who had it on a 454. I currently have it on a 1966 396, that has yet to be fired since rebuilt. I am going a different route with this engine. No issues that I am aware but I can give it a good one over. It is for a standard 9.8 deck, oval port.

**70STOVEBOLT** · 05-12-2018, 10:38 AM

Check it out, if no issues I would be interested in some sort of trade.

halfgassed · 05-16-2018, 04:35 PM

I looked it over last night. All the threads look good on the carb, distributor hold down, and t-stat housing along with all bracket bosses.

Hows this sound, I'll ship you my intake, I will include cash/check for return shipment. If you like it, ill pay shipping for your intake back to me.

If you dont like my intake, you package it back up with my cash/check, and you pay for return shipping on my intake?

I noticed on another thread you were looking for bench seat sliders. I have the remnants of a 72 that I cut for parts. I dont know the condition of the sliders ( probably won't till this weekend) but if they are decent I will pull them and package them with the intake. You can keep them either way.

**70STOVEBOLT** · 05-16-2018, 04:39 PM

That sounds great. Just let me know when you ship it so I know when to expect it. I will PM my shipping address, which will be my work. I will then let you know when I receive it.
PM sent.

halfgassed · 05-16-2018, 04:41 PM

I dont know how soon ya need this but it might take me 2-3 days to get my other intake prepped and swapped on to the motor. I dont want to leave a fresh built full roller 396 wide open with all the fab work I have going on in my garage currently.

**70STOVEBOLT** · 05-16-2018, 04:42 PM

No rush, I still have the stock iron intake on my motor as well.

**70STOVEBOLT** · 06-20-2018, 10:39 AM

Trade has been made. Thank you Matt!

halfgassed · 06-22-2018, 04:56 PM

Thanks again, all was in condition as described, great doing business with ya mark. Now I have to get going on my twin turbo tall deck project

.

05-02-2018, 05:02 PM	#26
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB or trade I think it will work for both, there is an adapter with it. The model number is 454TD so it should be for a tall deck. Here are some pics: Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-03-2018, 12:20 AM	#28
halfgassed Registered User Join Date: Jan 2010 Location: marquette mi Posts: 28	Re: WTB or trade Used, is been stripped and painted and cleared a grayish/silver. I currently have it on a engine back in the corner of the garage, I can get ya a pic in the next day or two

05-03-2018, 07:44 AM	#29
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB or trade Ok, I will wait for pics __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-09-2018, 06:25 PM	#30
halfgassed Registered User Join Date: Jan 2010 Location: marquette mi Posts: 28	Re: WTB or trade Sorry for the delay, got busy.

05-11-2018, 04:37 PM	#31
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB or trade Any issues with the manifold? What type of engine have you run it on? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-12-2018, 09:15 AM	#32
halfgassed Registered User Join Date: Jan 2010 Location: marquette mi Posts: 28	Re: WTB or trade Got it from a buddy who had it on a 454. I currently have it on a 1966 396, that has yet to be fired since rebuilt. I am going a different route with this engine. No issues that I am aware but I can give it a good one over. It is for a standard 9.8 deck, oval port.

05-12-2018, 10:38 AM	#33
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB or trade Check it out, if no issues I would be interested in some sort of trade. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-16-2018, 04:35 PM	#34
halfgassed Registered User Join Date: Jan 2010 Location: marquette mi Posts: 28	Re: WTB or trade I looked it over last night. All the threads look good on the carb, distributor hold down, and t-stat housing along with all bracket bosses. Hows this sound, I'll ship you my intake, I will include cash/check for return shipment. If you like it, ill pay shipping for your intake back to me. If you dont like my intake, you package it back up with my cash/check, and you pay for return shipping on my intake? I noticed on another thread you were looking for bench seat sliders. I have the remnants of a 72 that I cut for parts. I dont know the condition of the sliders ( probably won't till this weekend) but if they are decent I will pull them and package them with the intake. You can keep them either way.

05-16-2018, 04:39 PM	#35
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB or trade That sounds great. Just let me know when you ship it so I know when to expect it. I will PM my shipping address, which will be my work. I will then let you know when I receive it. PM sent. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-16-2018, 04:41 PM	#36
halfgassed Registered User Join Date: Jan 2010 Location: marquette mi Posts: 28	Re: WTB or trade I dont know how soon ya need this but it might take me 2-3 days to get my other intake prepped and swapped on to the motor. I dont want to leave a fresh built full roller 396 wide open with all the fab work I have going on in my garage currently.

05-16-2018, 04:42 PM	#37
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB or trade No rush, I still have the stock iron intake on my motor as well. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-20-2018, 10:39 AM	#38
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB or trade Trade has been made. Thank you Matt! __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-22-2018, 04:56 PM	#39
halfgassed Registered User Join Date: Jan 2010 Location: marquette mi Posts: 28	Re: WTB or trade Thanks again, all was in condition as described, great doing business with ya mark. Now I have to get going on my twin turbo tall deck project .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.