Looking for additional unfused ignition locations

[davepl]

Originally Posted by imholte

Correct, they came with all the fuses and wiring, I am just trying to find the best place to connect the trigger wire, I thought it was best to use the IGN UNFUSED tab in the fusebox (and put an inline fuse in) but both of mine are in use. Just need to know if I connect another wire to one of the ones coming off of the wires connected to the IGN UNFUSED that it wont draw too much off and cause problems.

Thanks for your help.

If, as I said, you're just talking about triggering the relays from the IGN terminal and the actual fan power will come from the battery or junction block, then you're in terms of current.

The amount of current it takes to turn on a relay coil is maybe 150mA as a guess.