OH K5 part out with in-line six - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rayray767 · 07-15-2018, 06:55 PM

Not sure when I’m going to be able to get to this project but I’m going to be parting this thing out. It has an in-line six starts and runs & drives . All the body panels on it are shot but there are a few usable parts . Just let me know what you might be interested in

rayray767 · 07-15-2018, 06:58 PM

Here are some more pics

**craneboy72** · 07-15-2018, 07:26 PM

Subscribe

**too much stuff** · 07-15-2018, 07:46 PM

Top hold downs and spare tire carrier prices.
Front seat with brackets also.

wwjd-5-2 · 07-15-2018, 07:58 PM

Spare tire carrier, gas filler cover, and seats

Newtynewt · 07-15-2018, 07:59 PM

Steering wheel please.
Posted via Mobile Device
And second in line for spare tire carrier.

**MikeCofield** · 07-15-2018, 08:05 PM

Any leveling mats

**a1vintage69** · 07-15-2018, 09:10 PM

Ray, do you have the jack, lug wrench and handle? first in line if available. a1

CrewCab59 · 07-15-2018, 09:53 PM

The complete air cleaner with hardware. What shape is the tailgate in?

Thanks

**4x41971SWB** · 07-15-2018, 10:17 PM

Condition and price on the complete hatch, top wire harness, sun visors, brakets from transfer case tp frame, and passenger seat belt.
Thanks

waylonbud · 07-15-2018, 10:40 PM

Also interested in complete hatch. Please put me 2nd in line.

**68350** · 07-15-2018, 10:44 PM

Interested in the tire carrier, front seat with brackets

**DeadheadNM** · 07-15-2018, 11:27 PM

I'd be interested in the rear brackets for the rear seat pending cost/condition and maybe the rear seat arm rests. Thanks. Pete

**rockc** · 07-15-2018, 11:28 PM

I interested in complete top with hatch>

NJKelly · 07-16-2018, 12:07 AM

I I'm interested in the spare tire carrier and the hatch. I'll be driving by you on the way back from Nebraska with a 72 ochre on July 30th. Making a few stops along the way four seats in a convertible top.

jaybatta · 07-16-2018, 12:27 AM

Million dollar question...tow hooks?

Early Rider Steve · 07-16-2018, 01:44 AM

Fuel filler neck, vent tube, and the quarter panel cuts for the fuel filler neck about 6" around.

**tmontg01** · 07-16-2018, 05:21 AM

Interested in the single wall top wire harness and plate

GSD Guy · 07-16-2018, 07:04 AM

Very interested in rear seat arm rests with hardware to mount. Thanks!

**craneboy72** · 07-16-2018, 11:30 AM

If the rear bumper brackets are correct for a 71 and are not rusted bad I’ll take them pending price and condition

chevyguy_72 · 07-16-2018, 01:17 PM

Interested in the random hubcap in the back... looks like garage art to me...

**maldo** · 07-16-2018, 03:17 PM

I am interested in the hatch handle please give price and shipping to 94533. Thank you

kv63 · 07-16-2018, 04:12 PM

Hey Ray. In line for the spare tire carrier shipped to 90713. Thanks.

rayray767 · 07-17-2018, 05:45 PM

Just wanted to touch bases with everyone still at work this evening and going to my second shortly.. I’ve got to work Saturday but just a few hours . I’ll be in contact after that ...
thanks...
Ray

toomany2yz · 07-18-2018, 02:25 PM

Title? Price on what's left after everything is picked over?

07-15-2018, 06:55 PM	#1
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	K5 part out with in-line six Not sure when I’m going to be able to get to this project but I’m going to be parting this thing out. It has an in-line six starts and runs & drives . All the body panels on it are shot but there are a few usable parts . Just let me know what you might be interested in Attached Images Last edited by rayray767; 07-15-2018 at 07:03 PM.

07-15-2018, 06:58 PM	#2
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: K5 part out with in-line six Here are some more pics Attached Images

07-15-2018, 07:26 PM	#3
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 761	Re: K5 part out with in-line six Subscribe

07-15-2018, 07:46 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: K5 part out with in-line six Top hold downs and spare tire carrier prices. Front seat with brackets also. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-15-2018, 07:58 PM	#5
wwjd-5-2 Registered User Join Date: Mar 2018 Location: Modesto, Cali. 95350 Posts: 191	Re: K5 part out with in-line six Spare tire carrier, gas filler cover, and seats

07-15-2018, 07:59 PM	#6
Newtynewt Registered User Join Date: Jan 2018 Location: Mooresville NC Posts: 287	Re: K5 part out with in-line six Steering wheel please. Posted via Mobile Device And second in line for spare tire carrier.

07-15-2018, 08:05 PM	#7
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,928	Re: K5 part out with in-line six Any leveling mats

07-15-2018, 09:10 PM	#8
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 4,013	Re: K5 part out with in-line six Ray, do you have the jack, lug wrench and handle? first in line if available. a1

07-15-2018, 09:53 PM	#9
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: K5 part out with in-line six The complete air cleaner with hardware. What shape is the tailgate in? Thanks __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

07-15-2018, 10:17 PM	#10
4x41971SWB Senior Member Join Date: May 2016 Location: Escondido CA Posts: 573	Re: K5 part out with in-line six Condition and price on the complete hatch, top wire harness, sun visors, brakets from transfer case tp frame, and passenger seat belt. Thanks

07-15-2018, 10:40 PM	#11
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: K5 part out with in-line six Also interested in complete hatch. Please put me 2nd in line.

07-15-2018, 10:44 PM	#12
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: K5 part out with in-line six Interested in the tire carrier, front seat with brackets __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

07-15-2018, 11:27 PM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,445	Re: K5 part out with in-line six I'd be interested in the rear brackets for the rear seat pending cost/condition and maybe the rear seat arm rests. Thanks. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-15-2018, 11:28 PM	#14
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: K5 part out with in-line six I interested in complete top with hatch> __________________ 72 chevy 3/4 ton 4X4

07-16-2018, 12:07 AM	#15
NJKelly Registered User Join Date: Mar 2018 Location: New Jersey Posts: 379	Re: K5 part out with in-line six I I'm interested in the spare tire carrier and the hatch. I'll be driving by you on the way back from Nebraska with a 72 ochre on July 30th. Making a few stops along the way four seats in a convertible top.



Register or Log In To remove these advertisements.

07-16-2018, 12:27 AM	#16
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 838	Re: K5 part out with in-line six Million dollar question...tow hooks? __________________ Joe 1968 K20 1970 K20 Semper Fi

07-16-2018, 01:44 AM	#17
Early Rider Steve Registered User Join Date: Oct 2015 Location: Fort Mohave, Arizona Posts: 44	Re: K5 part out with in-line six Fuel filler neck, vent tube, and the quarter panel cuts for the fuel filler neck about 6" around. __________________ Steve 1971 Custom Deluxe pickup 1972 K-5 Blazer

07-16-2018, 05:21 AM	#18
tmontg01 Senior Member Join Date: May 2015 Location: Sierra Vista, Arizona Posts: 398	Re: K5 part out with in-line six Interested in the single wall top wire harness and plate __________________ 1968 C10 SWB 400SBC with VN327 20's 1972 K5 Blazer 383SBC 2011 Cadillac CTSV

07-16-2018, 07:04 AM	#19
GSD Guy Registered User Join Date: Jul 2010 Location: Jacksonville, FL Posts: 85	Re: K5 part out with in-line six Very interested in rear seat arm rests with hardware to mount. Thanks!

07-16-2018, 11:30 AM	#20
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 761	Re: K5 part out with in-line six If the rear bumper brackets are correct for a 71 and are not rusted bad I’ll take them pending price and condition

07-16-2018, 01:17 PM	#21
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: K5 part out with in-line six Interested in the random hubcap in the back... looks like garage art to me... __________________ Current Rides: Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread EvilK5 - 71 K5 Blazer Evil Twin - 2006 Suzuki M109R EvilDmax- 2018 GMC 2500 Denali Duramax

07-16-2018, 03:17 PM	#22
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 703	Re: K5 part out with in-line six I am interested in the hatch handle please give price and shipping to 94533. Thank you

07-16-2018, 04:12 PM	#23
kv63 Registered User Join Date: Nov 2017 Location: Lakewood, Ca Posts: 143	Re: K5 part out with in-line six Hey Ray. In line for the spare tire carrier shipped to 90713. Thanks.

07-17-2018, 05:45 PM	#24
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: K5 part out with in-line six Just wanted to touch bases with everyone still at work this evening and going to my second shortly.. I’ve got to work Saturday but just a few hours . I’ll be in contact after that ... thanks... Ray

07-18-2018, 02:25 PM	#25
toomany2yz Registered User Join Date: Dec 2014 Location: Auburn Posts: 57	Re: K5 part out with in-line six Title? Price on what's left after everything is picked over?

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode