LMC Lower Control Arm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rcazwillis · 07-15-2018, 08:07 PM

Cleaning up lower control arms on Zane's 71. Discovered passenger side had blown out the bushing and wasted the lower control arm. LMC sells individual lower control arms, but listed as 3/4 ton. Are the pieces for a 1/2 ton and 3/4 ton the same?

Who else sells individual lower control arms? Brothers only sells sets.

ElKotze · 07-15-2018, 09:01 PM

My local NAPA store is selling them individually with or without the ball joints pressed in.

ryans69chevy · 07-16-2018, 12:13 AM

I got mine at the junkyard for $75 and they took it off the truck.

**dflarsen77** · 07-16-2018, 02:08 AM

Here’s a used one on eBay
https://www.ebay.com/itm/71-89-CHEVY...from=R40&rt=nc

stormtown · 07-17-2018, 06:35 AM

what is it with our trucks and the passenger side? Have 2 1972's and had to replace both passenger sides due to huge dents in them. Found them at Dean's Truck Farm in TN--$50 for pair but I'm close enough to pick up

**michael bustamante** · 07-17-2018, 06:39 PM

no 3/4 ton lower control arms are different. different size ball joints. I found out the hard way.

rcazwillis · 07-17-2018, 08:43 PM

Thanks to everyone. Found one at Manes Truck parts. Shipped for $89. Should be here Thursday.

07-15-2018, 08:07 PM	#1
rcazwillis Registered User Join Date: Aug 2013 Location: Fort Worth, TX Posts: 309	LMC Lower Control Arm Cleaning up lower control arms on Zane's 71. Discovered passenger side had blown out the bushing and wasted the lower control arm. LMC sells individual lower control arms, but listed as 3/4 ton. Are the pieces for a 1/2 ton and 3/4 ton the same? Who else sells individual lower control arms? Brothers only sells sets. __________________ Zane's 71 Build

07-15-2018, 09:01 PM	#2
ElKotze Registered User Join Date: Nov 2014 Location: Southwest Kansas Posts: 306	Re: LMC Lower Control Arm My local NAPA store is selling them individually with or without the ball joints pressed in. __________________ '64 C10 LWB, 283, 5speed '68 C20 LWB, 327, 4speed '69 C20 Custom Camper Longhorn, 350, 4speed '72 C20 Cheyenne Super, 396, TH400 '66 C60, 292, 4speed

07-16-2018, 12:13 AM	#3
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: LMC Lower Control Arm I got mine at the junkyard for $75 and they took it off the truck.

07-16-2018, 02:08 AM	#4
dflarsen77 Active Member Join Date: Jun 2016 Location: Salida, CA Posts: 177	Re: LMC Lower Control Arm Here’s a used one on eBay https://www.ebay.com/itm/71-89-CHEVY...from=R40&rt=nc __________________ David Larsen 1970 Chevrolet C-10

07-17-2018, 06:35 AM	#5
stormtown Registered User Join Date: Jul 2018 Location: morristown, tn Posts: 66	Re: LMC Lower Control Arm what is it with our trucks and the passenger side? Have 2 1972's and had to replace both passenger sides due to huge dents in them. Found them at Dean's Truck Farm in TN--$50 for pair but I'm close enough to pick up

07-17-2018, 06:39 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: LMC Lower Control Arm no 3/4 ton lower control arms are different. different size ball joints. I found out the hard way. __________________ 1967custom

07-17-2018, 08:43 PM	#7
rcazwillis Registered User Join Date: Aug 2013 Location: Fort Worth, TX Posts: 309	Re: LMC Lower Control Arm Thanks to everyone. Found one at Manes Truck parts. Shipped for $89. Should be here Thursday. __________________ Zane's 71 Build

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.