possible to swap cabs with engine in? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**guyryan100** · 05-12-2004, 09:44 PM

possible to swap cabs with engine in?

The bed is off and the front end is removed but I wonder if I can get away without pulling the engine. Too risky?

?

1971 Cheyenne · 05-12-2004, 10:08 PM

Yes you can do it, just lift it straight off, and make sure the firewall dosen't hit the dizzy. I did it...

Longhorn Man · 05-12-2004, 10:40 PM

Just remember to remove anything that connects the cab to the frame, like master cylinder, harnesses ect... pick it up, and pull it back as soon as you can to gain more "swaying room" and you'll be OK.

05-12-2004, 09:44 PM	#1
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 481	possible to swap cabs with engine in? possible to swap cabs with engine in? The bed is off and the front end is removed but I wonder if I can get away without pulling the engine. Too risky? ?

05-12-2004, 10:08 PM	#2
1971 Cheyenne Registered User Join Date: Nov 2002 Location: Bellevue, WA Posts: 1,480	Yes you can do it, just lift it straight off, and make sure the firewall dosen't hit the dizzy. I did it... __________________ Brian Pal 1971 Cheyenne 10 454/th400-Undergoing a full frame off resto. 1972 Chevy short/step 2wd, 350/th350 1983 M1009 CUCV Military K5 Blazer 1981 Dodge 1 ton 4x4 dually flatbed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-12-2004, 10:40 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Just remember to remove anything that connects the cab to the frame, like master cylinder, harnesses ect... pick it up, and pull it back as soon as you can to gain more "swaying room" and you'll be OK.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.