|
05-12-2004, 04:25 PM
|
#1 |
|
Unending Project
Join Date: Aug 2003
Location: Sequim, WA
Posts: 337
|
Help With Lights?
this is for my '64, but I'm guessing the wiring is the same...
So... My turn signals work, but only when the headlights are on. My brake lights and parking lights don't work at all. When the headlights are off, the turn signal flasher still sends juice to the bulb, but only enough to barely light it up (not visible through the lens). Any thoughts? Could be my headlight switch? Piper |
|
|
|
05-12-2004, 04:33 PM
|
#2 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Sounds like a poor ground. Check to see if the bed has a bonding wire going to the frame anywhere, if not, attach one and your lighting problem will likely go away. You can just use some 10 ga. primary wire with terminal lugs crimped to both ends.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|
|
|
|
|
05-12-2004, 05:15 PM
|
#3 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Start with a new ground wire, see what that does. Don't even bother looking to see if the stock one is there. installing a new onw will remove all doubt.
|
|
|
|
|
05-12-2004, 06:02 PM
|
#4 |
|
Unending Project
Join Date: Aug 2003
Location: Sequim, WA
Posts: 337
|
Thanks... I'll give it a shot.
|
|
|
|
|
05-13-2004, 01:43 AM
|
#5 |
|
My other Love
Join Date: Aug 2001
Location: Castlegar B.C. Canada
Posts: 4,085
|
chances are if it has a wood bed, you need that ground, if not that I would check to see if there is corrosion in the sockets, is it a real rats nest of wiring in the 64?
__________________
 Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life |
|
|
|
|
05-13-2004, 11:53 AM
|
#6 |
|
Unending Project
Join Date: Aug 2003
Location: Sequim, WA
Posts: 337
|
No, Surprisingly the wiring is in great shape. I cleaned the sockets with a wire brush when I checked the bulbs, and even replaced one. I haven't gotten around to trying the ground yet, been busy welding the patches into the door handles. I'll try that first thing today tho.
Piper |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
