Ridetech 4-Link Coil-Over Install

[Rexroth]

Originally Posted by JohnJ@RideTech

After we had the front end buttoned up, it was time to install the front frame bracing included in the kit.

These components are designed to take the flex out of the front of the truck and add support to the steering box area. The braces will give the truck a better feel through corners and remove the steering box flex under hard cornering. The cross brace has Heim ends and lock nuts for adjustability.

Installation of these pieces is pretty straight forward. The instructions will tell you what bolts will need to be removed and where holes will need to be drilled. Just like the c-notch, we used a center punch and a pilot hole before drilling to final size.

Attachment 1689602


Attachment 1689603

Curious, does the cross brace with the heim joints come with the front braces when you order separately?