|
11-25-2018, 01:04 PM
|
#1 |
|
Registered User
Join Date: May 2018
Location: Porterville
Posts: 53
|
C notch question
How low can you go on a bolt in/weld in c notch? I want to go at least 7 or 8 in the rear
Posted via Mobile Device |
|
|
|
11-25-2018, 04:29 PM
|
#2 |
|
Senior Member
 
Join Date: Oct 2014
Location: New Palestine In
Posts: 932
|
Re: C notch question
My 68 C10 had a 7" lowering in the rear and I used the CPP bolt in C notch kit. At ride height I had 2 3/4" clearance from the bump stop to the top of the axle housing. Never had a bottoming out problem.
__________________
Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net |
|
|
|
|
11-25-2018, 07:19 PM
|
#3 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
|
Re: C notch question
I did the DJM flip on the back of my 69 short step and it lowered it 7 1/4". I used the small urethane pucks that came with the kit for bumpstops. I have no notch. It hits the stop on occassion, but not enough for me to justify cutting the frame up.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
