CA LS1 long block engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Mr_Rich** · 10-29-2018, 05:34 PM

I'm trying to sell my LS1 that I pulled from my '98 Pontiac Firebird. I installed an LS6 in the car. The LS1 has the take-off cast iron exhaust manifolds and full length Cadillac CTS/V oil pan and full length windage tray from that LS6 engine. I've advertised the engine price from $1950 to $1350. I'd still plan on using this engine except that my project plans changed and I no longer have my project car.

**Mr_Rich** · 10-30-2018, 01:58 PM

Sold

Macdaddy1 · 10-31-2018, 02:12 PM

How many miles and do you have the harness or other accessories?

**Mr_Rich** · 11-01-2018, 06:00 AM

Quote:

Originally Posted by Macdaddy1

How many miles and do you have the harness or other accessories?

The harness is part of the car I'm still driving. This was a take-out engine like I mentioned in the original post. It had over 100K on it but I maintained it with regular oil changes every 5K and it was my date car and touring car so I had a lot of freeway miles. I'd still use if I had a project to install it in.

**Mr_Rich** · 11-27-2018, 06:12 PM

Sold

10-29-2018, 05:34 PM	#1
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	CA LS1 long block engine I'm trying to sell my LS1 that I pulled from my '98 Pontiac Firebird. I installed an LS6 in the car. The LS1 has the take-off cast iron exhaust manifolds and full length Cadillac CTS/V oil pan and full length windage tray from that LS6 engine. I've advertised the engine price from $1950 to $1350. I'd still plan on using this engine except that my project plans changed and I no longer have my project car. __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

10-30-2018, 01:58 PM	#2
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: CA LS1 long block engine Sold Attached Images __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C Last edited by Mr_Rich; 11-27-2018 at 06:12 PM.

10-31-2018, 02:12 PM	#3
Macdaddy1 Registered User Join Date: Dec 2017 Location: Niceville Florida Posts: 347	Re: CA LS1 long block engine How many miles and do you have the harness or other accessories?

11-27-2018, 06:12 PM	#5
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: CA LS1 long block engine Sold __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.