|
12-07-2018, 06:47 PM
|
#1 |
|
Registered User
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 993
|
79 rearend in a 64?
So I've got a line on a 79 1/2 ton that I plan to scavenge the front suspension, etc., from but I'm tossing around the idea of using the rear end, especially if it has a better ratio. I understand it will be 3/4" wider on each side. I can manage to mount the pads for the trailing arms and maintain the proper pinion angle but what do I do to mount a panhard rod?
|
|
|
|
12-07-2018, 09:23 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
|
Re: 79 rearend in a 64?
You would probably have better luck if this was posted in something other than the Blazer/Jimmy board.
Your best bet is to buy the kit with new trailing arm mounts and the new panhard rod mount. Speedway Motors has it for $140 inclunding track bar.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
12-08-2018, 07:57 AM
|
#3 |
|
Registered User
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 993
|
Re: 79 rearend in a 64?
I was wondering where my post went. Not sure how I ended up here, lol.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
