WA Tilt Column, column shift, serviced and painted

[randy500]

This one is nice and the real deal. Removed from a 1972 C20 Cheyenne Super as shown on the SPID of the ochre glovebox door I listed for sale yesterday.
http://67-72chevytrucks.com/vboard/s...d.php?t=776839
It has been completely disassembled, bead blasted, cleaned, painted, lubed and set to factory specs.
$435 shipped.

[randy500]

This was worked on with the proper tools.

[randy500]

You identify a true truck tilt by the following attributes.
1. Green indicator lamp filter.
2. Steering wheel shaft lacks snap ring groove.
3. Middle part of column doesnt have extra holes cut in it for van high placement neutral safety switch.
4. Output spline has short stickout.
5. Shift indicator lens as shown in pictures is truck style.
6. Hazard knob as shown in pictures is correct truck style.
7. Super long grey wire for indicator bulb with proper black packard female connector.
8. Short wire cover at bottom of column

[randy500]

Wiring cover

[randy500]

I have an overdrive indicator lens i could exchange with the current one at no cost and a new shift lever for an additional $30, that i just picked up from Classic Heartbeat

[Oddfire]

Super nice piece!

[randy500]

Originally Posted by Oddfire

Super nice piece!

Thank you!

[dtkarst]

Trying to take myself into actually needing this thing lol

[randy500]

Originally Posted by dtkarst

Trying to take myself into actually needing this thing lol

I’m glad I won’t be in the room when you get the email saying this...


”I’ll take it”

[dtkarst]

Pm sent

[Super Dude]

I'll take it...but not sure if you have a deal going with another member

[dtkarst]

I pm’d him about it, but I didn’t put it in my first post but I’ll take it. Hope I didn’t make a mess here

[randy500]

Originally Posted by dtkarst

I pm’d him about it, but I didn’t put it in my first post but I’ll take it. Hope I didn’t make a mess here

I think per the rules it still my option as to who I sell it to, I will take it is not a firm rule. Selling to you as you sent me a message about it an your a long time member and buyer here.

Use the link below to my PayPal, put a note in there of what your paying for and I will ship it tomorrow.

[randy500]

Originally Posted by Super Dude

I'll take it...but not sure if you have a deal going with another member

Sold to drkarst, pending payment.
I will have another column ready probably Wednesday or so of this week if your still interested, I will put you first in line on that one.

[Super Dude]

Hi. If its a real truck column and as nice as that one is...I'll take it. I'll try to keep an eye out for your ad. Thanks

[randy500]

Originally Posted by Super Dude

Hi. If its a real truck column and as nice as that one is...I'll take it. I'll try to keep an eye out for your ad. Thanks

That one is from a motor home, those have the short stickout shaft, the only real difference when I finish it will be that the shifter has a step in it. It will be a no modification direct bolt in and will be just as nice as this one, Price will be $375 shipped I think.
If you want to be first inline I will give you that and send you a message when I list it, 24 hours to decide or respond.

[Super Dude]

Sounds good. I'll take a look at it when you post it.

[flashed]

Next in line please .

[Hidesertchevy]

I have bought a column from Randy and his work is top notch!

[randy500]

Originally Posted by flashed

Next in line please .

I will put you in line when I list it.

[randy500]

Originally Posted by Hidesertchevy

I have bought a column from Randy and his work is top notch!

Thanks for the great compliment. I need that, the other column builder has a very strong folllowing....almost cult-like.

[flashed]

I have one of his as well .

[randy500]

Originally Posted by flashed

I have one of his as well .

Thanks, there are a few of them out there...
I rebuild non tilt columns too when I have them and they need it to be sellable.

[205harleyman]

Do you have truck tilt column available?

[randy500]

Originally Posted by 205harleyman

Do you have truck tilt column available?

I should have another column done by middle of next week. I am waiting on a new set of column grommets, its all cleaned, bead blasted and ready to assemble, its a real clean piece.
Its from a motorhome and I have converted it to truck and it will be a direct bolt in. The only difference is the shifter arm is a little different shape. I will point it out when I post pictures of it.