CA Lower TC/ flexplate cover for T350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Mr_Rich** · 12-02-2018, 06:15 PM

I think there may be someone else who needs a cover like these. The front one was used on a T300 two speed trans/ 6 cyl engine and the back photo is one I used on a T350/ SBC. The opening for the starter is different between the two.
$20 plus shipping for either one and I do Pay Pal.

**1968k20** · 12-02-2018, 09:16 PM

I'll take the 350 cover please! Sending pm

**Mr_Rich** · 12-04-2018, 05:13 AM

Quote:

Originally Posted by Mr_Rich

I think there may be someone else who needs a cover like these. The front one was used on a T300 two speed trans/ 6 cyl engine and the back photo is one I used on a T350/ SBC. The opening for the starter is different between the two.
$20 plus shipping for either one and I do Pay Pal.

I made a mistake and I overlooked the fact that these housings fit the T350's that use different size flexplates. The cover in front is the metal housing that could be used on the engines using the 168T flexplate and the plastic housing was used on the engine that used a 153T flexplate. That's an important distinction.

blindbug · 12-04-2018, 10:26 AM

Quote:

Originally Posted by Mr_Rich

I made a mistake and I overlooked the fact that these housings fit the T350's that use different size flexplates. The cover in front is the metal housing that could be used on the engines using the 168T flexplate and the plastic housing was used on the engine that used a 153T flexplate. That's an important distinction.

Is there a simple way to identify which flexplate you have? I'm looking for a TH350 dust cover as well, and don't know which flexplate is currently installed.

**Mr_Rich** · 12-04-2018, 12:12 PM

Quote:

Originally Posted by blindbug

Is there a simple way to identify which flexplate you have? I'm looking for a TH350 dust cover as well, and don't know which flexplate is currently installed.

The starter on a 168T flexplate has staggered mounting, and the 153T flexplate has parallel mounting.
. ' or . .

**1968k20** · 12-08-2018, 04:01 PM

I've got staggered starter bolts

**Mr_Rich** · 12-09-2018, 02:43 AM

Quote:

Originally Posted by 1968k20

I've got staggered starter bolts

So you would need the metal one in the pic; I'm pretty sure on that one.

**1968k20** · 12-09-2018, 11:14 AM

Quote:

Originally Posted by Mr_Rich

So you would need the metal one in the pic; I'm pretty sure on that one.

So I'll take the metal one please.
Figure out shipping to 96020 please,no hurry, and I'll get you paid.

**Mr_Rich** · 12-10-2018, 08:39 PM

Quote:

Originally Posted by 1968k20

So I'll take the metal one please.
Figure out shipping to 96020 please,no hurry, and I'll get you paid.

Check pms please...

**1968k20** · 12-10-2018, 08:55 PM

Quote:

Originally Posted by Mr_Rich

Check pms please...

I responded!

**Mr_Rich** · 12-11-2018, 03:00 AM

Quote:

Originally Posted by 1968k20

I responded!

I don't always login when I scan the forum. Just makin' sure...Thanks

12-02-2018, 06:15 PM	#1
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Lower TC/ flexplate cover for T350 I think there may be someone else who needs a cover like these. The front one was used on a T300 two speed trans/ 6 cyl engine and the back photo is one I used on a T350/ SBC. The opening for the starter is different between the two. $20 plus shipping for either one and I do Pay Pal. Attached Images __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

12-02-2018, 09:16 PM	#2
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: Lower TC/ flexplate cover for T350 I'll take the 350 cover please! Sending pm __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

12-08-2018, 04:01 PM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: Lower TC/ flexplate cover for T350 I've got staggered starter bolts __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.