Buried to Bagged 1972 2wd - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 09-19-2018, 06:10 PM

Quote:

Originally Posted by Slick67

That sounds sexual!

I wouldn’t kick her out of bed

Chulisohombre · 09-19-2018, 07:20 PM

Dash is very cool. Going ultra retro. Maybe you said but what's that out if?

Slick67 · 09-26-2018, 01:49 PM

Quote:

Originally Posted by gringoloco

I wouldn’t kick her out of bed

Quote:

Originally Posted by Chulisohombre

Dash is very cool. Going ultra retro. Maybe you said but what's that out if?

Thank you, it is out of a 1955 Bel Air. Had to be stretched 9.5 inches, but it fits.

Chulisohombre · 09-27-2018, 07:08 PM

Ok thx. I thought it looked like a 50s dash. Very cool

**Sac** · 09-28-2018, 10:12 AM

Looking killer!

I know you are running 22x8.5 & 22x12's.. What are your tire specs?

mcbassin · 10-04-2018, 07:35 AM

Looks great!

Slick67 · 10-31-2018, 07:59 PM

Quote:

Originally Posted by Chulisohombre

Ok thx. I thought it looked like a 50s dash. Very cool

Thanks man!

Quote:

Originally Posted by Sac

Looking killer!

I know you are running 22x8.5 & 22x12's.. What are your tire specs?

Thank you sir!
305/40-22 outback 265/40-20 upfront.

Quote:

Originally Posted by mcbassin

Looks great!

Thank you sir, it's been a crazy build so far!

Slick67 · 10-31-2018, 09:20 PM

After getting the front clip on and half way aligned it looks like a project!!
Name: 20181021_184906.jpg
Views: 1238
Size: 44.1 KB

Fitting those Slosh Tubz under the hood. I had a fitment issue but a quick call to Mike and POW, done!!!
Name: 20181013_182756.jpg
Views: 1244
Size: 55.1 KB

Still have a ton to do just on the front clip but it is coming along.

Name: 20181021_183735.jpg
Views: 1241
Size: 48.7 KB

jjzepplin · 11-01-2018, 07:46 AM

Ok then. Tic toc.

**jaros44sr** · 11-01-2018, 11:47 AM

JMHO but, if you're doing a 2WD it should look like this thread

olrosa · 11-01-2018, 12:02 PM

Nice, nice, nice

mcbassin · 11-08-2018, 08:28 AM

Very nice!

**72gmguy** · 11-28-2018, 04:48 PM

Did you figure out what to do with the cowl along the bottom of the windshield? I've been curious for a while what you decided. This thing is incredible!

Slick67 · 12-11-2018, 06:26 PM

Quote:

Originally Posted by jjzepplin

Ok then. Tic toc.

I know, right!?!?

Quote:

Originally Posted by jaros44sr

JMHO but, if you're doing a 2WD it should look like this thread

Lol, the how to thread!!

Quote:

Originally Posted by olrosa

Nice, nice, nice

Thank you Sir!

Quote:

Originally Posted by mcbassin

Very nice!

Thanks Brotha!

Quote:

Originally Posted by 72gmguy

Did you figure out what to do with the cowl along the bottom of the windshield? I've been curious for a while what you decided. This thing is incredible!

Yes sir I did. I'll get some pics up for ya a little later tonight or tomorrow. It was pretty simple once I figured it out. Happy to share!!

Slick67 · 12-11-2018, 07:03 PM

Roadster cowl customization in 5 easy steps!!!

I really hope this helps someone out!

Mark where your cowl should be cut to match the A-pillar.
Name: 20181025_113009_resized.jpg
Views: 989
Size: 35.0 KB

First the back portion of the cowl was cut off and relief cuts where made from the back toward the front. I took out about 1.25" at the rear and none across the center of the cowl. I cut out excess metal until both pieces butted together nicely. This gives you a flatter surface than stock.
Name: 20181025_170341_resized.jpg
Views: 1077
Size: 35.2 KB

Name: 20181025_170341_resized.jpg
Views: 1077
Size: 35.2 KB

I cut out the fresh air vents on the cowl and replaced it with 18 gauge metal. I made the metal concave to match the cowl then used a shrinker/stretcher to get it to bend properly to match the compound curve from side to side.
Name: 20181102_185100_resized.jpg
Views: 1061
Size: 50.6 KB

Name: 20181102_185100_resized.jpg
Views: 1061
Size: 50.6 KB

I worked a little short hair fiberglass into the cuts then went over that with some trusty bondo to get it to look halfway decent.
Name: 20181105_003247_resized.jpg
Views: 1036
Size: 52.2 KB

Name: 20181105_003247_resized.jpg
Views: 1036
Size: 52.2 KB

After a small amount of sanding I got it very close but still feel a small dip where the inside relief cut was made. A little more pookie on it, and it should be good! For the record, I'm not a bodyman!!

Name: IMG_20181107_175935_553_resized.jpg
Views: 1110
Size: 30.1 KB

**lks dcvn** · 12-11-2018, 09:50 PM

That's pretty nice work for a non-body man. Looks awesome!

jjzepplin · 12-12-2018, 12:32 AM

Oh now that's funny- For the record.

Slick67 · 01-17-2019, 05:07 PM

Quote:

Originally Posted by lks dcvn

That's pretty nice work for a non-body man. Looks awesome!

I gave it a shot!!!

Quote:

Originally Posted by jjzepplin

Oh now that's funny- For the record.

Definitely not a body man!! But I'll try anything once!!

Slick67 · 01-23-2019, 05:29 PM

Excuse all the junk in the background. Just wanted to post a picture showing the shaved cowl. It makes the whole truck look different.
Name: 20190106_165017_resized_1.jpg
Views: 931
Size: 57.0 KB

Name: 20190106_165017_resized_1.jpg
Views: 931
Size: 57.0 KB

I have been working to get the dash, door, fender, body and custom sail panel on the door aligned. This is turning into a hassle but it will be worth it in the end.

Name: 20190106_165123_resized.jpg
Views: 911
Size: 61.7 KB

Chulisohombre · 01-23-2019, 09:02 PM

Looks awesome. All the lines are coming together nicely.

Slick67 · 09-17-2019, 10:18 AM

Quote:

Originally Posted by Chulisohombre

Looks awesome. All the lines are coming together nicely.

Thank you sir!!

Slick67 · 09-17-2019, 11:08 AM

I have not done much to the Blazer lately, but that is about to change!! This is the concept I have in mind and if it flows together it may be what happens. I am going for the old Corvette look.

Thoughts?

Name: 20190530_193521.jpg
Views: 923
Size: 44.8 KB

Name: 20190530_193510.jpg
Views: 921
Size: 45.9 KB

Joseog83 · 09-17-2019, 11:33 AM

Quote:

Originally Posted by Slick67

I have not done much to the Blazer lately, but that is about to change!! This is the concept I have in mind and if it flows together it may be what happens. I am going for the old Corvette look.

Thoughts?
Attachment 1939648

Attachment 1939649

Have never seen that before! Would look killer!!

Slick67 · 09-17-2019, 11:42 AM

This is the reason my Blazer has not been getting much attention. I bought this little 78 GMC and put some time in on it. She is cool, just not old enough.
Name: 20190408_190858.jpg
Views: 740
Size: 65.0 KB

Name: 20190408_190858.jpg
Views: 740
Size: 65.0 KB

Name: 20190525_152518 - Copy.jpg
Views: 789
Size: 49.8 KB

Slick67 · 09-17-2019, 11:43 AM

Quote:

Originally Posted by Joseog83

Have never seen that before! Would look killer!!

Thanks man! Just trying to think outside the box and bring cool stuff to the custom world!!

09-19-2018, 07:20 PM	#377
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Buried to Bagged 1972 2wd Dash is very cool. Going ultra retro. Maybe you said but what's that out if? __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

09-27-2018, 07:08 PM	#379
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Buried to Bagged 1972 2wd Ok thx. I thought it looked like a 50s dash. Very cool __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

09-28-2018, 10:12 AM	#380
Sac Senior Member Join Date: Nov 2013 Location: Franklinton, LA Posts: 256	Re: Buried to Bagged 1972 2wd Looking killer! I know you are running 22x8.5 & 22x12's.. What are your tire specs? __________________ Green Survivor Father/Son Truck <SeveredTies>

10-04-2018, 07:35 AM	#381
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Buried to Bagged 1972 2wd Looks great! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

10-31-2018, 09:20 PM	#383
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd After getting the front clip on and half way aligned it looks like a project!! Fitting those Slosh Tubz under the hood. I had a fitment issue but a quick call to Mike and POW, done!!! Still have a ton to do just on the front clip but it is coming along. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

11-01-2018, 07:46 AM	#384
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Buried to Bagged 1972 2wd Ok then. Tic toc. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

11-01-2018, 11:47 AM	#385
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,691	Re: Buried to Bagged 1972 2wd JMHO but, if you're doing a 2WD it should look like this thread __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-01-2018, 12:02 PM	#386
olrosa Registered User Join Date: Jul 2012 Location: Longview WA Posts: 746	Re: Buried to Bagged 1972 2wd Nice, nice, nice __________________ Seth Instagram: sethrosa11 My Build Thread: "Betty" http://67-72chevytrucks.com/vboard/s...d.php?t=613225 1966 C10 Patina: http://67-72chevytrucks.com/vboard/s...d.php?t=716802 1978 Big 10 http://67-72chevytrucks.com/vboard/s...d.php?t=771383

11-08-2018, 08:28 AM	#387
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Buried to Bagged 1972 2wd Very nice! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-28-2018, 04:48 PM	#388
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 821	Re: Buried to Bagged 1972 2wd Did you figure out what to do with the cowl along the bottom of the windshield? I've been curious for a while what you decided. This thing is incredible! __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii Last edited by 72gmguy; 11-28-2018 at 04:49 PM. Reason: Punctuation

12-11-2018, 07:03 PM	#390
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd Roadster cowl customization in 5 easy steps!!! I really hope this helps someone out! Mark where your cowl should be cut to match the A-pillar. First the back portion of the cowl was cut off and relief cuts where made from the back toward the front. I took out about 1.25" at the rear and none across the center of the cowl. I cut out excess metal until both pieces butted together nicely. This gives you a flatter surface than stock. I cut out the fresh air vents on the cowl and replaced it with 18 gauge metal. I made the metal concave to match the cowl then used a shrinker/stretcher to get it to bend properly to match the compound curve from side to side. I worked a little short hair fiberglass into the cuts then went over that with some trusty bondo to get it to look halfway decent. After a small amount of sanding I got it very close but still feel a small dip where the inside relief cut was made. A little more pookie on it, and it should be good! For the record, I'm not a bodyman!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

12-11-2018, 09:50 PM	#391
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,346	Re: Buried to Bagged 1972 2wd That's pretty nice work for a non-body man. Looks awesome!

12-12-2018, 12:32 AM	#392
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Buried to Bagged 1972 2wd Oh now that's funny- For the record. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

01-23-2019, 05:29 PM	#394
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd Excuse all the junk in the background. Just wanted to post a picture showing the shaved cowl. It makes the whole truck look different. I have been working to get the dash, door, fender, body and custom sail panel on the door aligned. This is turning into a hassle but it will be worth it in the end. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

01-23-2019, 09:02 PM	#395
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Buried to Bagged 1972 2wd Looks awesome. All the lines are coming together nicely. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.



Register or Log In To remove these advertisements.

09-17-2019, 11:08 AM	#397
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd I have not done much to the Blazer lately, but that is about to change!! This is the concept I have in mind and if it flows together it may be what happens. I am going for the old Corvette look. Thoughts? __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

09-17-2019, 11:42 AM	#399
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd This is the reason my Blazer has not been getting much attention. I bought this little 78 GMC and put some time in on it. She is cool, just not old enough. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.