71 GMC parting out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrodhenryj · 05-12-2004, 07:21 PM

Olblue: I have a very nice one that I cut at the windshield with the AC vents intact. 75 plus UPS shipping. It is oversized so expect it to cost more.

Don: I have some AC parts but not sure exactly which ones your needing. Maybe you could elaborate and I'll check. Here is a pic of my Nomad, lets see yours.

hexafamily · 05-12-2004, 11:09 PM

Chuck, I'll have to get a digital picture of my '57, but its about half way done. Just got it painted (red with white top), but still have the motor, wiring, and interior to do. Seeing yours, makes me want to get it done. Has factory air, PS, PB, and electric seat. Was a total wreck when I got it in '77. Its just taken a while.

Regarding the air conditioning parts for the truck. I am looking for the under dash wiring harness for a truck with air conditioning. Also need the plastic vacuum reservoir that bolts to the side of the air conditioning box. Also need the electrical relay that activates the system. Also interested in the 3 track engine pulley if you have one. The main thing I need is the wiring harness if you have one thats any good.
Thanks
Don

2birds40 · 05-13-2004, 09:18 AM

hey i am trying to swap to power drums and need all the parts required do you have them if so how much and when is this stuff going to be at burnsmans place thanks

Burnsman · 05-13-2004, 09:40 AM

2birds, everything should be at my place by next saturday. I don't have any power drum stuff, but maybe Chuck does and he can throw them in with the load. Brian

2birds40 · 05-13-2004, 10:23 AM

that would be cool to pick it all up in one shot hope he has something gonna need a price also thanks guys

Hotrodhenryj · 05-13-2004, 10:38 AM

2birds40:
I have a complete power booster that was on this truck. Brakes worked great, could throw it in. 60. Have the pedal and related hardware also if needed. If you need a few pics PM me your email address.

Don:
I wil look and get back to you.

gkauno · 05-13-2004, 11:40 AM

Interested in the ower steering pump and brackets. Is it a 350? Please let me know what you want for it and the estimated shipping to 98122.

Thanks

Grant

Hotrodhenryj · 05-13-2004, 01:40 PM

I have a complete power steering setup for small block, 150 shipped. Dont really want to split it as I already have to many steering boxes here.

mustanglx347 · 05-13-2004, 02:05 PM

i am in need of power steering brackets for chevy 350. Will take pump also, but not necessary. let me know if you have them.

Thanks

2birds40 · 05-14-2004, 01:44 AM

hey chuck i am going to have to pass on the booster thanks anyhow

chipflyer · 05-20-2004, 10:03 PM

I am looking for just one bracket, the one that bolts to the intake manifold? Might that be the one you have?

Jeff

67ChevyC10Stepside · 05-20-2004, 11:16 PM

what kinda shape is cab in and how much and pics? i dont care which cab any one you got....and how much to get it to burnsys?

truckpower429 · 05-21-2004, 03:55 AM

hey hotrodhenryj pm sent

71GMCStepside · 05-21-2004, 08:28 AM

Do you have one in good shape??

Thanks

05-12-2004, 07:21 PM	#26
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Olblue: I have a very nice one that I cut at the windshield with the AC vents intact. 75 plus UPS shipping. It is oversized so expect it to cost more. Don: I have some AC parts but not sure exactly which ones your needing. Maybe you could elaborate and I'll check. Here is a pic of my Nomad, lets see yours. Attached Images __________________ Arizona rust free sheetmetal

05-12-2004, 11:09 PM	#27
hexafamily Registered User Join Date: Sep 2003 Location: Lee's Summit MO 64086 (Kansas City) Posts: 128	Chuck, I'll have to get a digital picture of my '57, but its about half way done. Just got it painted (red with white top), but still have the motor, wiring, and interior to do. Seeing yours, makes me want to get it done. Has factory air, PS, PB, and electric seat. Was a total wreck when I got it in '77. Its just taken a while. Regarding the air conditioning parts for the truck. I am looking for the under dash wiring harness for a truck with air conditioning. Also need the plastic vacuum reservoir that bolts to the side of the air conditioning box. Also need the electrical relay that activates the system. Also interested in the 3 track engine pulley if you have one. The main thing I need is the wiring harness if you have one thats any good. Thanks Don __________________ Thanks Don '57 Chevy Nomad '70 Buick GSX '72 Cheyene (Boys' truck)

05-13-2004, 09:40 AM	#29
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	parts 2birds, everything should be at my place by next saturday. I don't have any power drum stuff, but maybe Chuck does and he can throw them in with the load. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-13-2004, 10:38 AM	#31
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	2birds40: I have a complete power booster that was on this truck. Brakes worked great, could throw it in. 60. Have the pedal and related hardware also if needed. If you need a few pics PM me your email address. Don: I wil look and get back to you. __________________ Arizona rust free sheetmetal

05-13-2004, 01:40 PM	#33
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	I have a complete power steering setup for small block, 150 shipped. Dont really want to split it as I already have to many steering boxes here. __________________ Arizona rust free sheetmetal

05-13-2004, 09:18 AM	#28
2birds40 Registered User Join Date: Apr 2004 Location: new york Posts: 26	hey i am trying to swap to power drums and need all the parts required do you have them if so how much and when is this stuff going to be at burnsmans place thanks

05-13-2004, 10:23 AM	#30
2birds40 Registered User Join Date: Apr 2004 Location: new york Posts: 26	that would be cool to pick it all up in one shot hope he has something gonna need a price also thanks guys

05-13-2004, 11:40 AM	#32
gkauno Registered User Join Date: Mar 2004 Location: Seattle, WA Posts: 19	Interested in the ower steering pump and brackets. Is it a 350? Please let me know what you want for it and the estimated shipping to 98122. Thanks Grant

05-13-2004, 02:05 PM	#34
mustanglx347 Registered User Join Date: May 2004 Location: Texas Posts: 44	i am in need of power steering brackets for chevy 350. Will take pump also, but not necessary. let me know if you have them. Thanks

05-14-2004, 01:44 AM	#35
2birds40 Registered User Join Date: Apr 2004 Location: new york Posts: 26	hey chuck i am going to have to pass on the booster thanks anyhow

05-20-2004, 10:03 PM	#36
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	I am looking for just one bracket, the one that bolts to the intake manifold? Might that be the one you have? Jeff

05-20-2004, 11:16 PM	#37
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	what kinda shape is cab in and how much and pics? i dont care which cab any one you got....and how much to get it to burnsys? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-21-2004, 03:55 AM	#38
truckpower429 Registered User Join Date: Nov 2003 Location: Okc, Oklahoma Posts: 33	hey hotrodhenryj pm sent

05-21-2004, 08:28 AM	#39
71GMCStepside Gettin' there Join Date: Mar 2004 Location: Houston (Richmond) Posts: 106	Auto Tranny Crossmember Do you have one in good shape?? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.