2010 L99/6L80E swap into 95 C1500 Silverado - The 1947 - Present Chevrolet & GMC Truck Message Board Network

doubleds19666 · 03-08-2019, 10:39 PM

Thank you for the kind words. I am still using the stock 3.41 gears. I enjoy the economy and still get the seat of the pants feeling when I need it.

I made a push button TUTD controller and wired it in. I didn't reprogram the pcm in the trans to the Corvette, but I did reprogram the ecm to use TUTD, which didn't work well. The truck drove like it had tourettes. I immediately pulled over and unwired the controller and put back the old tune. Never did anymore research. I should follow up on it. Any recommendations?

03-08-2019, 10:39 PM	#17
doubleds19666 Registered User Join Date: Sep 2013 Location: St.Paul, MN Posts: 53	Re: 2010 L99/6L80E swap into 95 C1500 Silverado Thank you for the kind words. I am still using the stock 3.41 gears. I enjoy the economy and still get the seat of the pants feeling when I need it. I made a push button TUTD controller and wired it in. I didn't reprogram the pcm in the trans to the Corvette, but I did reprogram the ecm to use TUTD, which didn't work well. The truck drove like it had tourettes. I immediately pulled over and unwired the controller and put back the old tune. Never did anymore research. I should follow up on it. Any recommendations? __________________ "Grandpa's Truck" 1974 C10 ZZ4/L98/TPI Tubular Trailing Arm conversion 5/7 drop with 4 wheel 13" Baer disc brakes

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.