|
04-21-2019, 08:42 PM
|
#1 |
|
Registered User
Join Date: Mar 2019
Location: Pearcy AR.
Posts: 62
|
Your drop
Ok, can anyone out there with a 4/6 static drop give me a measurement from bottom of fenders to floor and include your tire hieght, I'm a lot of trouble I've been told
|
|
|
|
04-21-2019, 08:52 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
|
Re: Your drop
A more relevant number is from the center of the wheel hub to the bottom of the wheel well opening. On my 69 short step with ECE 2 1/2" spindles and 2" springs it's 14 1/2" from center of wheel hub to bottom of fender wheel opening. It started out at 19 1/4" on LF. On RF its 14 3/4 and started out at 19 3/8.
In the rear it started out as 20 3/8 Left andwent to 14 1/8. On the Right it was 21 1/4 and went to 14 1/2. Leaf spring rear with a DJM flip.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
04-21-2019, 09:28 PM
|
#3 |
|
Registered User
Join Date: Mar 2019
Location: Pearcy AR.
Posts: 62
|
Re: Your drop
Thanks for that. Just measured, F=14 1/2 R=16, has drop coils all round, spindles and 2" blocks rear. Slight rake, kicking around putting stock spindles and removing blocks, looks awesome but a little hard getting in and out, I'm 6'3" . 5feet of that is legs.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
