OH WTB 1967 C50 Front Fenders and Extesnions

[71'tahoe]

I'm Looking for a set of 67' C/50 front fenders and extensions. I am also looking for a workable cab. I am willing to drive up to 900/1000 miles.

[bill3rail]

Look in the Heavy Haulers area.

http://67-72chevytrucks.com/vboard/f...play.php?f=239

[CarlsLQ9SS]

I know a junk yard that has a c/50 dump truck that the cab and front end is on in decent condition. The name of it is L&D auto sales in Pine Knot Ky. He is very reasonable on his parts. I can pm you his number if you are interested.

[71'tahoe]

Originally Posted by bill3rail

Look in the Heavy Haulers area.

http://67-72chevytrucks.com/vboard/f...play.php?f=239

All ready have. The one guy is 911 miles from me and I'm not sure if he will hold the parts till I can make arrangements to get out there.

[71'tahoe]

Originally Posted by CarlsLQ9SS

I know a junk yard that has a c/50 dump truck that the cab and front end is on in decent condition. The name of it is L&D auto sales in Pine Knot Ky. He is very reasonable on his parts. I can pm you his number if you are interested.

That would be great if you would. I found a few trucks in Kansas and Nebraska but that's a 3 day round trip.

[67ranchhand]

Not sure where you are in Ohio, but there is a yard a few miles south of Tiffin ohio that has some of these 50/60 series trucks. Danners auto wrecking is the naïf the yard. I try to make it over as often as I can to see if they get anything old in and I’ve checked some of these for parts but never paid attention to the condition of the sheet metal. Most of them are old farm trucks and not in to bad of shape. They have about six or so of them. Good luck!

[71'tahoe]

Originally Posted by 67ranchhand

Not sure where you are in Ohio, but there is a yard a few miles south of Tiffin ohio that has some of these 50/60 series trucks. Danners auto wrecking is the naïf the yard. I try to make it over as often as I can to see if they get anything old in and I’ve checked some of these for parts but never paid attention to the condition of the sheet metal. Most of them are old farm trucks and not in to bad of shape. They have about six or so of them. Good luck!

I'm between Cincinnati and Columbus. So Tiffin isn't too far away. I'll look into Danners. Thank you!

[CarlsLQ9SS]

https://www.google.com/maps/place/L+...5!4d-84.438269

[CarlsLQ9SS]

I was there last week and looked at the cab. I was gonna get the cluster but someone has already taken the air pressure gauge in it. the floor is solid and has the driver seat in it. The driver fender looked good too but I couldnt get around to the front of the truck or open the hood, but it looked to be complete and could see the engine in it from the hump being unbolted in the cab.

[67ranchhand]

Do you need a cab for a pickup or the 50/60 series? The 50/60 series is a little different at the front lower corner of the doors. I’m sure you knew that. Just want to clarify. I know where there is a real nice pickup cab if that’s what you need.

[71'tahoe]

Originally Posted by CarlsLQ9SS

I was there last week and looked at the cab. I was gonna get the cluster but someone has already taken the air pressure gauge in it. the floor is solid and has the driver seat in it. The driver fender looked good too but I couldnt get around to the front of the truck or open the hood, but it looked to be complete and could see the engine in it from the hump being unbolted in the cab.

Thanks for the information. I'll try to get out there and check it out.

[71'tahoe]

Originally Posted by 67ranchhand

Do you need a cab for a pickup or the 50/60 series? The 50/60 series is a little different at the front lower corner of the doors. I’m sure you knew that. Just want to clarify. I know where there is a real nice pickup cab if that’s what you need.

I do need a cab. I have done some measuring from my C50 cab and my C10 cab. They are similar but you are correct about the front of the floor boards/toe boards are a little different. I believe from the floor seem to the back of the cab they are the same.
I could modify a c/10,20,30 cab if the price was right.

[67ranchhand]

I will ask what the price is and let you know in a day or two. Unless you need to know sooner. I will try to get pictures for you too.

[67ranchhand]

I apologize for not getting the pictures and price on the cab for you yet. Life gets in the way of hobbies sometimes. I will stop tomorrow and get the pics and info for you tomorrow. Thanks.

[IronCanine]

Don't know if this helps or if you've already checked these guys out.

https://candhtruck.com/trucks/347

[chevmn]

There is a very nice 67 C50 complete in central MO advertised on Facebook marketplace now. Not sure if you would be interested, but sure looks like a very nice truck with roughly 50,000 miles on it. Not my truck, nor do I know anything about it, but one of the nicest I have seen for a while. Ill try posting a link, not sure if it will work.

https://www.facebook.com/marketplace..._module_result