52 pickup door panel (interior)

[oldman3]

Pic 1 I've removed the upper panel and getting ready to glue pleats in place.

Pic 2 Laid pleats to double check.

Pic 3 Here I've sprayed glue on panel and on the pleats. I only do about 4 or 5 at a time.

Pic 4 This is the glue to use if you don't have a spray gun to use other glue.

[oldman3]

Pic 1 Here all the pleats have been glued to the panel.

Pic 2 Here is the back side of the panel where I've staped each pleat to the panel, just to make sure nothing comes apart.

Pic 3 I just laid the upper and lower panel to give you the ideal of how it will look.

[oldman3]

Have to go thru the pics and write what I want to say for each, so I've be back later...Jim