5/5 drop 83 C10 SWB for sale in CT - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jon_volk · 06-23-2003, 09:08 AM

Parting ways with my 83 C10 shortbed. It has a fresh DJM suspension spindle/coil springs up front and a DJM flip kit out back. Also the entire front suspension has a fresh rebuild on it with less than 500 miles. Its got a 305 (120k i think?) with K&N extreme top open element air filter, headers, 2.5" mandrel bent exhuast w/ dynomax ultra flow mufflers. runs good but has a leak somewhere. ive always just parked it over a drip pan and its been fine. 700r4 tranny slips between 1-2 when left in drive but shifts pretty good when gears are manually selected. could probably go another 6 months before really needing a rebuild. Body has usual dings and dents for a 20 year old truck and is 99% rust free. the only rust is a little surface stuff on the drivers side door sill. no rot to speak of. windshield has a crack but is still intact.....

heres some pics i just took this morning.

car is located in milford, CT 06460

make offer

pic 1

pic 2

pic 3

pic 4

pic 5

gldevall · 06-23-2003, 03:47 PM

No engine pics???

jon_volk · 06-23-2003, 06:16 PM

here ya go

jon_volk · 06-26-2003, 07:34 AM

1000 takes it.

jon_volk · 06-29-2003, 10:22 AM

750 firm must go

jon_volk · 07-02-2003, 07:17 AM

ttt

kxmotox247 · 07-02-2003, 11:33 AM

If it were closer, i'd probably take it. Too bad.

jon_volk · 07-06-2003, 01:23 PM

buuuuuuuuumpin to the top again.

Boones · 07-07-2003, 05:38 PM

how well does it run... would it make it down ot South Carolina
send me an email at showtimesc@aol.com

jon_volk · 07-08-2003, 01:46 PM

i used it as a daily driver for almost a year with no problems. the only reason i parked it/decided to sell was that i bought a 92 camaro. i dont see why it wouldnt make it down there.

phantom dually · 07-08-2003, 07:33 PM

How far are you from Louisville KY??

Slammed '87 · 07-08-2003, 08:04 PM

That would be a sweet truck to rebuild/customize. Is that original paint? Man i wish it was in Canada, or even closer.

jon_volk · 07-09-2003, 07:30 AM

Quote:

Originally posted by phantom dually
How far are you from Louisville KY??

about 800 miles

jon_volk · 07-16-2003, 07:36 AM

ttt

Shorti · 07-16-2003, 07:55 AM

will you take 500 for the truck! i live in jersey dont live that far!

jon_volk · 07-16-2003, 01:08 PM

Quote:

Originally posted by Shorti
will you take 500 for the truck! i live in jersey dont live that far!

no, 750 is a huge loss and i said firm.

**crossy** · 07-16-2003, 01:59 PM

Jon, knowing how rare it is to find rust free anywhere on the east coast I have to believe that with the growing popularity of these trucks as hot rods that even a cheap ad in a local paper would sell that truck for you. Ask $900 . If I wearn't going on vaca soon I would add that one to my colloection in a heatbeat(pun) . DAVE

**crossy** · 07-16-2003, 02:43 PM

Jon, I may have talked a friend into it send your phone number to me at all4trux@snip.net thanx , DAVE

AirMale · 07-16-2003, 05:12 PM

I have the perfect 383/450hp engine for that truck!

daddywarbucks · 06-01-2004, 06:41 PM

still have that chevy for sale? im looking for a lowered 2wd shortie to drop my stroked 305 in- i live near binghamton, ny and it doesnt look like too far of a drive - think it would make the trip??

06-23-2003, 09:08 AM	#1
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	5/5 drop 83 C10 SWB for sale in CT Parting ways with my 83 C10 shortbed. It has a fresh DJM suspension spindle/coil springs up front and a DJM flip kit out back. Also the entire front suspension has a fresh rebuild on it with less than 500 miles. Its got a 305 (120k i think?) with K&N extreme top open element air filter, headers, 2.5" mandrel bent exhuast w/ dynomax ultra flow mufflers. runs good but has a leak somewhere. ive always just parked it over a drip pan and its been fine. 700r4 tranny slips between 1-2 when left in drive but shifts pretty good when gears are manually selected. could probably go another 6 months before really needing a rebuild. Body has usual dings and dents for a 20 year old truck and is 99% rust free. the only rust is a little surface stuff on the drivers side door sill. no rot to speak of. windshield has a crack but is still intact..... heres some pics i just took this morning. car is located in milford, CT 06460 make offer pic 1 pic 2 pic 3 pic 4 pic 5 __________________ 83 Monte Carlo 92 Camaro

06-23-2003, 03:47 PM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	No engine pics??? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-23-2003, 06:16 PM	#3
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	here ya go Last edited by jon_volk; 06-23-2003 at 06:25 PM.

07-02-2003, 11:33 AM	#7
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	If it were closer, i'd probably take it. Too bad. __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

07-08-2003, 07:33 PM	#11
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	How far are you from Louisville KY?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

06-26-2003, 07:34 AM	#4
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	1000 takes it.

06-29-2003, 10:22 AM	#5
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	750 firm must go

07-02-2003, 07:17 AM	#6
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	ttt

07-06-2003, 01:23 PM	#8
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	buuuuuuuuumpin to the top again.

07-07-2003, 05:38 PM	#9
Boones Registered User Join Date: Jun 2003 Location: Charleston SC Posts: 47	how well does it run... would it make it down ot South Carolina send me an email at showtimesc@aol.com

07-08-2003, 01:46 PM	#10
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	i used it as a daily driver for almost a year with no problems. the only reason i parked it/decided to sell was that i bought a 92 camaro. i dont see why it wouldnt make it down there.

07-08-2003, 08:04 PM	#12
Slammed '87 Registered User Join Date: Feb 2003 Location: Calgary Canada Posts: 556	That would be a sweet truck to rebuild/customize. Is that original paint? Man i wish it was in Canada, or even closer. __________________ If you can't rock the roads with your bumpers 1/2" off the ground, you're nowhere near low enough!

07-16-2003, 07:36 AM	#14
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	ttt

07-16-2003, 07:55 AM	#15
Shorti Registered User Join Date: Jul 2003 Location: jersey Posts: 3	will you take 500 for the truck! i live in jersey dont live that far!

07-16-2003, 01:59 PM	#17
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Jon, knowing how rare it is to find rust free anywhere on the east coast I have to believe that with the growing popularity of these trucks as hot rods that even a cheap ad in a local paper would sell that truck for you. Ask $900 . If I wearn't going on vaca soon I would add that one to my colloection in a heatbeat(pun) . DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

07-16-2003, 02:43 PM	#18
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Jon, I may have talked a friend into it send your phone number to me at all4trux@snip.net thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

07-16-2003, 05:12 PM	#19
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	I have the perfect 383/450hp engine for that truck! __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

06-01-2004, 06:41 PM	#20
daddywarbucks Registered User Join Date: May 2004 Posts: 6	still have that chevy for sale? im looking for a lowered 2wd shortie to drop my stroked 305 in- i live near binghamton, ny and it doesnt look like too far of a drive - think it would make the trip??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.