|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-25-2004, 12:34 AM
|
#1 |
|
Registered User
Join Date: Jan 2003
Location: Emmett, Idaho
Posts: 858
|
WTB...Front 4x4 Sway Bar
I'll come right out and admit that I know very little about this generation of truck. I'm looking for the front sway bar from a 4x4. I'd like to get the bar, the frame brackets, and the bolts that hold it to the springs mounts. I don't know what years have them and what don't. I'm pretty sure 78-80 are what I'm after, and I don't know if the 1/2 ton and 3/4 ton would be different. Any help is greatly appreciated.
__________________
Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" |
|
|
|
05-25-2004, 01:04 AM
|
#2 |
|
Registered User
Join Date: Sep 2003
Location: COVINGTON GEORGIA
Posts: 477
|
i think the 3/4 ton is bigger diamater
not 100% sure. i would think they would all be the same from 73-87 on trucks i dont know about blazers or suburbans
hope that helps
__________________
79 chevy k20 350/350/205/D44/14bFF 4.56 gears rock  LWB pimer black 01 S-10 ZR2 extended cab 4.3/4L60E/233 3.73 gear 31" DICK CEPEK CRUSHERS |
|
|
|
|
05-25-2004, 03:05 PM
|
#3 |
|
N9PHW
Join Date: Jan 2003
Location: PNW USA
Posts: 136
|
CamsK5 from CK5 has one in Redding, CA. He offered it to me for free but I'm planning on running crossover and couldnt use it.
__________________
"I got it one piece at a time and it didn't cost me a dime..." |
|
|
|
|
05-25-2004, 04:26 PM
|
#4 |
|
Registered User
Join Date: Jan 2003
Location: Emmett, Idaho
Posts: 858
|
Thanks Kenny, I'll give Cam a call
__________________
Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" |
|
|
|
|
05-25-2004, 08:33 PM
|
#5 |
|
Registered User
Join Date: Nov 2003
Location: whitesburg,Tn
Posts: 223
|
Where are you located? I have one off a 78 3/4 ton 4x4 I am in Morristown,Tn 37891 let me know if you are interested.
Roger |
|
|
|
|
05-25-2004, 08:45 PM
|
#6 |
|
Registered User
Join Date: Jan 2003
Location: Emmett, Idaho
Posts: 858
|
Roger, I'm interested. Kenny pointed me to one close by, but I haven't heard back yet. I'm in NorCal, if you want to shoot me a price shipped I'll let you know as soon as I hear from Cam if he still has it. Grass Valley, CA 95945 it would be a business address. Thanks
__________________
Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" |
|
|
|
|
06-01-2004, 11:41 PM
|
#7 |
|
Registered User
Join Date: Sep 2003
Location: Lewisville, NC
Posts: 1,836
|
73-87 truck bars will work, I think the brackets and bushings may be different but they will both bolt up fine as long as you have the bushings to match the right bracket. I may have one in the shed. I'll look tomorrow and let ya know.
__________________
1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle. |
|
|
|
|
06-02-2004, 12:28 AM
|
#8 |
|
Registered User
Join Date: Jan 2003
Location: Emmett, Idaho
Posts: 858
|
Found the Bar
To all that replied, Thanks. Kenny led me to a great deal and I've completed my search. Again, thanks for the help.
Larry
__________________
Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
