CA DIY4X CrossMember for SBC & BBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72K5CSTDarkOlive · 06-09-2019, 03:11 AM

I'm selling my DIY4X X-Member. I had it it for a short time for about 8 months.
Asking $175 plus Shipping

Madkidd007 · 06-09-2019, 08:47 AM

Can you take a measurement between these points, I have a Cummins that I need to know won’t be too wide to fit between the two flanges.

Madkidd007 · 06-09-2019, 09:09 AM

Just measured mine, if it’s atleast 13” and you can do $200 shipped to 30605 then I’ll take it

72K5CSTDarkOlive · 06-09-2019, 01:26 PM

Quote:

Originally Posted by Madkidd007

Just measured mine, if it’s at least 13” and you can do $200 shipped to 30605 then I’ll take it

It's 11".

*randy500* · 06-09-2019, 02:45 PM

What made you decide to not use the crossmember?

Madkidd007 · 06-09-2019, 03:00 PM

Quote:

Originally Posted by 72K5CSTDarkOlive

It's 11".

Well hell, what about the underside of the flat where the tube meets the flat plate? I could always modify it depending on that measurement.

72K5CSTDarkOlive · 06-09-2019, 03:47 PM

Quote:

Originally Posted by randy500

What made you decide to not use the crossmember?

I'm swapping the SBC for an LS and the diy4x cross member wont work.

72K5CSTDarkOlive · 06-09-2019, 03:50 PM

Quote:

Originally Posted by Madkidd007

Well hell, what about the underside of the flat where the tube meets the flat plate? I could always modify it depending on that measurement.

Not much more.. About 11.5"

Madkidd007 · 06-09-2019, 04:04 PM

Quote:

Originally Posted by 72K5CSTDarkOlive

Not much more.. About 11.5"

So close. If you get a chance can you get a picture from the front level with the frame. I’m trying to compare to my current engine placement with a 2wd crossmember so I can reference height. If my engine sits high enough then I can use it

**72gmguy** · 06-09-2019, 04:14 PM

$200 shipped?

72K5CSTDarkOlive · 06-09-2019, 04:24 PM

Quote:

Originally Posted by Madkidd007

So close. If you get a chance can you get a picture from the front level with the frame. I’m trying to compare to my current engine placement with a 2wd crossmember so I can reference height. If my engine sits high enough then I can use it

You bet. About to head off to work so I will do this tomorrow morning.

72K5CSTDarkOlive · 06-09-2019, 04:26 PM

Quote:

Originally Posted by 72gmguy

$200 shipped?

Depends, what is your zip?

Also, Madkidd007 was first to reply so if he ends up passing after I get him the pics tomorrow, you'll be first in line.

**72gmguy** · 06-09-2019, 04:27 PM

To a business in NJ 08203

Madkidd007 · 06-09-2019, 06:29 PM

Quote:

Originally Posted by 72K5CSTDarkOlive

You bet. About to head off to work so I will do this tomorrow morning.

Thank you sir. I’ll get a picture of my setup tonight so I can compare tomorrow. My actual oil pan is only 10” wide but the lip and block are 12” so height will be the defining factor

Madkidd007 · 06-10-2019, 09:17 AM

Well, I found a couple of pictures online. Unfortunately it doesn’t look like the newer or older style or going to work for me because of the height. Thanks for your time

72K5CSTDarkOlive · 06-10-2019, 03:12 PM

Quote:

Originally Posted by 72gmguy

To a business in NJ 08203

I think that could work. I'll need to take it apart and get a quote from UPS and I wont be able to do that until Wednesday.

**72gmguy** · 06-10-2019, 04:57 PM

Sounds good. No rush. Send me your PayPal if it works out.

72K5CSTDarkOlive · 06-12-2019, 06:00 PM

Quote:

Originally Posted by 72gmguy

Sounds good. No rush. Send me your PayPal if it works out.

I was quoted $82 to ship. I could do 225 shipped. Let me know. Thanks

**72gmguy** · 06-12-2019, 08:08 PM

Wow! That's a lot for shipping. Thanks for sharing shipping with me. I will do $225.

72K5CSTDarkOlive · 06-12-2019, 09:32 PM

Quote:

Originally Posted by 72gmguy

Wow! That's a lot for shipping. Thanks for sharing shipping with me. I will do $225.

Paypal: mgiorgianni1@gmail.com

I just pulled it out and will box it up tonight. Will ship tomorrow

**72gmguy** · 06-13-2019, 06:52 AM

Paypal sent. Thanks.

06-09-2019, 03:11 AM	#1
72K5CSTDarkOlive Registered User Join Date: Aug 2013 Location: Central Coast, CA Posts: 774	DIY4X CrossMember for SBC & BBC I'm selling my DIY4X X-Member. I had it it for a short time for about 8 months. Asking $175 plus Shipping Attached Images __________________ My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive

06-09-2019, 08:47 AM	#2
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,239	Re: DIY4X CrossMember for SBC & BBC Can you take a measurement between these points, I have a Cummins that I need to know won’t be too wide to fit between the two flanges. Attached Images __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

06-09-2019, 09:09 AM	#3
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,239	Re: DIY4X CrossMember for SBC & BBC Just measured mine, if it’s atleast 13” and you can do $200 shipped to 30605 then I’ll take it __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

06-09-2019, 02:45 PM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: DIY4X CrossMember for SBC & BBC What made you decide to not use the crossmember?

06-09-2019, 04:14 PM	#10
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: DIY4X CrossMember for SBC & BBC $200 shipped? __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

06-09-2019, 04:27 PM	#13
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: DIY4X CrossMember for SBC & BBC To a business in NJ 08203 __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

06-10-2019, 09:17 AM	#15
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,239	Re: DIY4X CrossMember for SBC & BBC Well, I found a couple of pictures online. Unfortunately it doesn’t look like the newer or older style or going to work for me because of the height. Thanks for your time __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

06-10-2019, 04:57 PM	#17
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: DIY4X CrossMember for SBC & BBC Sounds good. No rush. Send me your PayPal if it works out. __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

06-12-2019, 08:08 PM	#19
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: DIY4X CrossMember for SBC & BBC Wow! That's a lot for shipping. Thanks for sharing shipping with me. I will do $225. __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

06-13-2019, 06:52 AM	#21
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: DIY4X CrossMember for SBC & BBC Paypal sent. Thanks. __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.