55.2-59 Flatout Engineering Reference Thread

[Kevin_C]

So I spoke with Don and it seems like I may have a 3200 frame or 3/4 ton? Its the section that has the arch leading up to the Center line that is a little taller than a short box. Either way its not a huge deal. the Flat out brackets are 4.5" tapering down to 3.5" On my frame it appears that I need 3/4" taller so i'll fab up some spacers. the factory cross member that I drilled out was just removing the 4 rivets and moving it back about an inch.

Once I straighten that out I will mock up some shock bars and determine ride height before drilling my upper shock mounts