Would like to line my inner fenders...what should I use??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kickinasphalt · 06-05-2004, 05:32 PM

My inner fenders are currently white (like the rest of the pickup) but I would like to have them black but also have something that protects them. I was thinking maybe using Herculiner that is for beds and rolling some of that on. Any other suggestions??? Thanks!

**Palf70Step** · 06-05-2004, 05:41 PM

I used Wally world spray in bed liner for my front inner fenders. Whenever I get around to the rear steps, I'll be doing the same. Mine hasn't been on the road for a while and isn't a daily driver so I'm not sure how they will hold up in the long run, but it seems like they will do real well.

Follow the direction real well. I did mine out of the truck so it made it a bit easier.

**Classic Heartbeat** · 06-05-2004, 05:43 PM

Have them powder coated in a textured finish.. I have seen a couple of trucks done with it and it looks pretty cool!! The one on the left is called Silver Vein.

WES www.ClassicHeartbeat.com

Big J · 06-05-2004, 06:18 PM

Sand'em down, them brush on some Por-15. While the Por-15 is still tacky, spray it with your favorite gloss black rattle can paint. Then your good to go.

FRENCHBLUE72 · 06-05-2004, 06:58 PM

What ever you do don't use that spray on rubberized undercoating stuff!!!!!!!!

**N2TRUX** · 06-05-2004, 08:38 PM

Quote:

Originally Posted by WES

The one on the left is called Silver Vein.

WES www.ClassicHeartbeat.com

..........? You mean the "other" left

**Classic Heartbeat** · 06-05-2004, 09:00 PM

LOL....

Uhm, Ya......

WES www.ClassicHeartbeat.com

Sweet72 · 06-05-2004, 09:27 PM

Quote:

Originally Posted by FRENCHBLUE72

What ever you do don't use that spray on rubberized undercoating stuff!!!!!!!!

The undercoating on my inner fenders has lasted for 32 years. Why not use rubberized undercoating?

kickinasphalt · 06-06-2004, 05:49 PM

BIG J: I like the POR-15 because I can brush it on and I've heard how well this stuff adheres and how strong it is. Why do you need to go over it again with rattle can paint? Isn't already a semi-gloss black?

sactoC10 · 06-06-2004, 06:28 PM

This is a good thread. I've pulled my two front fenders and I'm wondering the same thing(s). What's wrong with the rubberized undercoating(s)? If I wanted to go with the POR-15, what's the smallest quantity it is available in, since I don't need very much? What to do...what to do!

gr8scott51 · 06-06-2004, 06:47 PM

I have to vote for powdercoating also.

kickinasphalt · 06-06-2004, 07:19 PM

Powder coating is not an option for me since I will not be removing the inner fenders.

FuelCellGuy · 06-06-2004, 07:45 PM

www.rattleguard.com

That's what I used on mine. Real simple....

FuelCellGuy · 06-06-2004, 07:48 PM

Here's a few pictures...this stuff is very durable.

jay-dawg · 06-06-2004, 11:41 PM

I drool everytime I see your truck mark!

weasel29gm · 06-07-2004, 10:04 PM

Go to Wally-Mart and get Rust-oleum Hammered in black. I did everything under the hood and looks good and easy to use. Around $4.50 a can. P/ coat is cool but alot easier to fix a scratch with this. When puttin' engine in scraped a few places, touched up with the hammered and couldn't tell it was there.

06-05-2004, 05:32 PM	#1
kickinasphalt Registered User Join Date: Jan 2000 Location: North Dakota Posts: 351	Would like to line my inner fenders...what should I use??? My inner fenders are currently white (like the rest of the pickup) but I would like to have them black but also have something that protects them. I was thinking maybe using Herculiner that is for beds and rolling some of that on. Any other suggestions??? Thanks! __________________ 1972 K-10 Longbox,6" lift w/35's/350/SM465/NP205/3.73 1972 C-10 Longbox,350/350 1998 Pontiac Grand Prix GTP FOR SALE: 1971 K-10 Longbox,350/SM465/NP205

06-05-2004, 05:41 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	I used Wally world spray in bed liner for my front inner fenders. Whenever I get around to the rear steps, I'll be doing the same. Mine hasn't been on the road for a while and isn't a daily driver so I'm not sure how they will hold up in the long run, but it seems like they will do real well. Follow the direction real well. I did mine out of the truck so it made it a bit easier. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-05-2004, 05:43 PM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Have them powder coated in a textured finish.. I have seen a couple of trucks done with it and it looks pretty cool!! The one on the left is called Silver Vein. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

06-05-2004, 06:18 PM	#4
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Sand'em down, them brush on some Por-15. While the Por-15 is still tacky, spray it with your favorite gloss black rattle can paint. Then your good to go. __________________ BAZINGA! My Build

06-05-2004, 09:00 PM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	LOL.... Uhm, Ya...... WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

06-05-2004, 06:58 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	What ever you do don't use that spray on rubberized undercoating stuff!!!!!!!!

06-06-2004, 05:49 PM	#9
kickinasphalt Registered User Join Date: Jan 2000 Location: North Dakota Posts: 351	BIG J: I like the POR-15 because I can brush it on and I've heard how well this stuff adheres and how strong it is. Why do you need to go over it again with rattle can paint? Isn't already a semi-gloss black? __________________ 1972 K-10 Longbox,6" lift w/35's/350/SM465/NP205/3.73 1972 C-10 Longbox,350/350 1998 Pontiac Grand Prix GTP FOR SALE: 1971 K-10 Longbox,350/SM465/NP205

06-06-2004, 06:28 PM	#10
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,055	This is a good thread. I've pulled my two front fenders and I'm wondering the same thing(s). What's wrong with the rubberized undercoating(s)? If I wanted to go with the POR-15, what's the smallest quantity it is available in, since I don't need very much? What to do...what to do!

06-06-2004, 06:47 PM	#11
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	I have to vote for powdercoating also. __________________ Silence is golden, duct tape is silver. - Scott

06-06-2004, 07:19 PM	#12
kickinasphalt Registered User Join Date: Jan 2000 Location: North Dakota Posts: 351	Powder coating is not an option for me since I will not be removing the inner fenders. __________________ 1972 K-10 Longbox,6" lift w/35's/350/SM465/NP205/3.73 1972 C-10 Longbox,350/350 1998 Pontiac Grand Prix GTP FOR SALE: 1971 K-10 Longbox,350/SM465/NP205

06-06-2004, 07:45 PM	#13
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	www.rattleguard.com That's what I used on mine. Real simple....

06-06-2004, 07:48 PM	#14
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Here's a few pictures...this stuff is very durable. Attached Images

06-06-2004, 11:41 PM	#15
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	I drool everytime I see your truck mark! __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

06-07-2004, 10:04 PM	#16
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	Go to Wally-Mart and get Rust-oleum Hammered in black. I did everything under the hood and looks good and easy to use. Around $4.50 a can. P/ coat is cool but alot easier to fix a scratch with this. When puttin' engine in scraped a few places, touched up with the hammered and couldn't tell it was there. __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.