Anyone found a shoulder harness? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phlegm · 08-11-2019, 10:59 AM

Anyone found a shoulder harness that will clip into my existing GM buckles on my lap belts and go into the stock fittings on the cab and floors?

atm70chevy · 08-11-2019, 11:06 AM

I just installed some shoulder belts from Juliano's. I'm not sure about buckling to your factory belts as mine did not have seat belts at all. The shoulder belts were very easy to install and bolting right up to factory holes.

**Smitty** · 08-11-2019, 02:22 PM

Mine are also from Juliano's and the customer service is GREAT!

**Getter-Done** · 08-11-2019, 02:58 PM

Tom sells them here on the forum.
He is a great guy to do business with.
Here a Link below
Link:http://67-72chevytrucks.com/vboard/s...ght=seat+belts

.

weq92f · 08-11-2019, 03:44 PM

.
Picked mine up from a local board member as well: MCBMatt...

https://www.mattsclassicbowties.com/...us/p10476.html

Hth,

-klb

**Smitty** · 08-11-2019, 04:29 PM

Bought mine before I knew about Tom who is a class vender to deal with. Have purchased from him and a whole lot of stuff from his uncle. Ricks Pickup Parts back when he was doing business. Still see them at the Big 3 here in San Diego if Febr.

phlegm · 08-12-2019, 02:49 PM

Thanks guys, From what everyone is saying you cant just add the shoulder harness/strap and clip into the existing buckle... these guys have GM button buckles so when I get there I will probably go that way.

thanks again.

wpavlis · 08-12-2019, 02:58 PM

I 2nd Tom. Great guy to deal with and my belts fit great.

**FirstOwner69** · 08-12-2019, 03:12 PM

The only ones I know of would be originals. I found these in a '72 Blazer in the junkyard.

1972K20 · 08-12-2019, 03:37 PM

Quote:

Originally Posted by FirstOwner69

The only ones I know of would be originals. I found these in a '72 Blazer in the junkyard.

Do they attached to the removable top? I guess you don't have shoulder belts without the top on.

**FirstOwner69** · 08-12-2019, 03:49 PM

Quote:

Originally Posted by 1972K20

Do they attached to the removable top? I guess you don't have shoulder belts without the top on.

Good question. I really don't recall the fronts, but what was left of the backs (the parts in the middle of my picture) were. You are probably right.

jimijam00 · 08-12-2019, 08:05 PM

Perfecting timing. Bought my truck and it didn't have any belts. Could get 3 pts quick enough, so I bought lap belts for trip across state. Just placed order for 3 pts from @t korinek

phlegm · 08-31-2019, 04:25 PM

I found these that can go over the starburst on the aftermarket belts. Probably the way I will go and use that 110 dollars for something else.

https://www.classicindustries.com/pr...RoC4PQQAvD_BwE

08-11-2019, 10:59 AM	#1
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Anyone found a shoulder harness? Anyone found a shoulder harness that will clip into my existing GM buckles on my lap belts and go into the stock fittings on the cab and floors? __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was

08-11-2019, 11:06 AM	#2
atm70chevy Registered User Join Date: Feb 2013 Location: Longview, Texas Posts: 173	Re: Anyone found a shoulder harness? I just installed some shoulder belts from Juliano's. I'm not sure about buckling to your factory belts as mine did not have seat belts at all. The shoulder belts were very easy to install and bolting right up to factory holes.

08-11-2019, 02:22 PM	#3
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,136	Re: Anyone found a shoulder harness? Mine are also from Juliano's and the customer service is GREAT! Attached Images __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

08-11-2019, 02:58 PM	#4
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,408	Re: Anyone found a shoulder harness? Tom sells them here on the forum. He is a great guy to do business with. Here a Link below Link:http://67-72chevytrucks.com/vboard/s...ght=seat+belts . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

08-11-2019, 03:44 PM	#5
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,218	Re: Anyone found a shoulder harness? . Picked mine up from a local board member as well: MCBMatt... https://www.mattsclassicbowties.com/...us/p10476.html Hth, -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

08-11-2019, 04:29 PM	#6
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,136	Re: Anyone found a shoulder harness? Bought mine before I knew about Tom who is a class vender to deal with. Have purchased from him and a whole lot of stuff from his uncle. Ricks Pickup Parts back when he was doing business. Still see them at the Big 3 here in San Diego if Febr. __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

08-12-2019, 02:49 PM	#7
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Re: Anyone found a shoulder harness? Thanks guys, From what everyone is saying you cant just add the shoulder harness/strap and clip into the existing buckle... these guys have GM button buckles so when I get there I will probably go that way. thanks again. __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was

08-12-2019, 02:58 PM	#8
wpavlis Registered User Join Date: Oct 2015 Location: San Tan Valley, Arizona Posts: 313	Re: Anyone found a shoulder harness? I 2nd Tom. Great guy to deal with and my belts fit great.

08-12-2019, 03:12 PM	#9
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: Anyone found a shoulder harness? The only ones I know of would be originals. I found these in a '72 Blazer in the junkyard. Attached Images

08-12-2019, 08:05 PM	#12
jimijam00 Registered User Join Date: Apr 2009 Location: PNW Posts: 553	Re: Anyone found a shoulder harness? Perfecting timing. Bought my truck and it didn't have any belts. Could get 3 pts quick enough, so I bought lap belts for trip across state. Just placed order for 3 pts from @t korinek

08-31-2019, 04:25 PM	#13
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Re: Anyone found a shoulder harness? I found these that can go over the starburst on the aftermarket belts. Probably the way I will go and use that 110 dollars for something else. https://www.classicindustries.com/pr...RoC4PQQAvD_BwE __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.