Shock relocation (not extenders) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JHILDE · 09-19-2019, 10:22 PM

Has anyone relocated the rear shocks to get a better angle/more vertical? Thinking of moving them both to the back of the axle.

2wd, flipped rear with assassin traction bars.

sweetk30 · 09-19-2019, 10:33 PM

2wd or 4wd ?

lifted or lowered ?

the reason there staggered 1 front / back is to help control axle wrap a little from the factory from what i have read over the years .

JHILDE · 09-19-2019, 10:58 PM

Quote:

Originally Posted by sweetk30

2wd or 4wd ?

lifted or lowered ?

the reason there staggered 1 front / back is to help control axle wrap a little from the factory from what i have read over the years .

I went back and added more info. 2wd, flipped, assassin traction bars.

SCOTI · 09-20-2019, 11:14 AM

Quote:

Originally Posted by JHILDE

Has anyone relocated the rear shocks to get a better angle/more vertical? Thinking of moving them both to the back of the axle.

2wd, flipped rear with assassin traction bars.

I did for my dually but I also ditched the leaf packs for a 4-bar w/rolling sleeved bags using the OE housing spring pad locations for the brackets everything attaches to. Both shocks are now mounted just behind the rear end.

it's not a bad idea for your flipped set-up (def better vs. the exaggerated angle the relocation brackets put the shocks at).

JHILDE · 09-20-2019, 02:20 PM

Quote:

Originally Posted by SCOTI

I did for my dually but I also ditched the leaf packs for a 4-bar w/rolling sleeved bags using the OE housing spring pad locations for the brackets everything attaches to. Both shocks are now mounted just behind the rear end.

it's not a bad idea for your flipped set-up (def better vs. the exaggerated angle the relocation brackets put the shocks at).

I thought about a 4 link but this truck is just going to be a hot rod cruiser, it was my granddad's and I don't want to cut it up a bunch. I have another truck planned and will probably be a built chassis, caged, and full stupid.

SCOTI · 09-20-2019, 03:36 PM

Quote:

Originally Posted by JHILDE

I thought about a 4 link but this truck is just going to be a hot rod cruiser, it was my granddad's and I don't want to cut it up a bunch. I have another truck planned and will probably be a built chassis, caged, and full stupid.

Mine was swapped strictly for ride quality & adjustment when pulling a trailer. C10's (c20's & c30's as well) ride so much better w/o the leaf set-up.

JHILDE · 09-20-2019, 06:17 PM

Quote:

Originally Posted by SCOTI

Mine was swapped strictly for ride quality & adjustment when pulling a trailer. C10's (c20's & c30's as well) ride so much better w/o the leaf set-up.

I know me and I'll prob just 4 link and coilover it later.

KQQL IT · 09-21-2019, 11:11 AM

How I did mine.

09-19-2019, 10:22 PM	#1
JHILDE Registered User Join Date: Sep 2009 Location: Quitman, Texas Posts: 52	Shock relocation (not extenders) Has anyone relocated the rear shocks to get a better angle/more vertical? Thinking of moving them both to the back of the axle. 2wd, flipped rear with assassin traction bars. Last edited by JHILDE; 09-19-2019 at 10:57 PM.

09-19-2019, 10:33 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: Shock relocation (not extenders) 2wd or 4wd ? lifted or lowered ? the reason there staggered 1 front / back is to help control axle wrap a little from the factory from what i have read over the years . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

09-21-2019, 11:11 AM	#8
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: Shock relocation (not extenders) How I did mine. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 09-21-2019 at 11:23 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.