|
10-06-2019, 08:41 PM
|
#1 |
|
Junior Member
 Join Date: Mar 2015
Location: San Clemente, CA
Posts: 88
|
k10 Dana 44 hub size
I have read that the common hub diameter is 78.3 for my year suburban, 1972 k10. I am measuring it with a digital caliper at 89.01. I cannot find any reference to a hub diameter with that sizing....confirmed that I have a correctly calibrated caliper. I have been googling and coming up with nothing. Am I measuring wrong? Is not a GM Dana 44 or is it a 10 bolt?
|
|
|
|
10-07-2019, 10:34 AM
|
#2 |
|
Registered User
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,852
|
Re: k10 Dana 44 hub size
Looks like a Dana. Is the measurement suppose to be the inside of the rotor hub? Or perhaps the pressed edge of the hub selector?
__________________
My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe |
|
|
|
|
10-07-2019, 10:42 AM
|
#3 |
|
Junior Member
Join Date: Mar 2015
Location: San Clemente, CA
Posts: 88
|
Re: k10 Dana 44 hub size
I’m not entirely sure. I’m specifically looking at wheel fitment at this point but will be going through and rebuilding the front and rear over time so I’ll need to know for parts. It’s definitely a Dana 44: stamped with 44-5f on the webbing.
|
|
|
|
|
10-07-2019, 11:25 AM
|
#4 |
|
Senior Member
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,955
|
Re: k10 Dana 44 hub size
Mine are 3.5”. Roughly 89mm.
__________________
Kirk 72 Blazer CST 4wd highlander |
|
|
|
|
10-08-2019, 11:48 AM
|
#5 |
|
Junior Member
Join Date: Mar 2015
Location: San Clemente, CA
Posts: 88
|
Re: k10 Dana 44 hub size
ok, thanks Blazerowner.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
