|
10-26-2019, 07:55 PM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Does this look right?
Took the carburetor off tonight and found it only had 2 bolts holding it down and both of them where loose. I thought dang 2 of them where either gone are broke off but not either one. The gasket only had 2 of the 4 bolt holes cut. It's been like this since I bought it cause I haven't touched it. Even when I had the carburetor rebuilt they said nothing about it.
The trucks been backfiring bad lately I guess I know why now. I put it back together with all 4 bolts and lock washers. I also found the passenger side exhaust flange loose again! 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode