Dodge Dana 60 in my 69 c20?

[57taskforce]

Originally Posted by Slowboat

Thanks for your help on this! Is there any Dana 60 with discs that is close enough to work?

I don’t know for sure about the wms on the later 14 bolts but you could always look into an early to mid 2000’s 10.5 or 11.5 14 bolt out of an hd gm truck, they are stronger than the 60s and will get you disks with a good drum park brake setup. I’ve got a couple stashed away but I’m not at a point where I can measure the wms on them. If I remember right somewhere around 09-10 they changed the stud pattern so the later ones won’t work with factory steel wheels. Obviously this would require a re-perch and new shock mounts but as said above that’s pretty easy.