Looking for exhaust system recommendations preferably stainless

[littlehopper]

Did and inconclusive search already.
I need an exhaust “kit” for my 396, auto,2wd C20 and was leaning toward the Pypes 2.5” kit. Has anyone used that or a similar set up?
Thanks, Joe

[cornerstone]

Not exactly but similar. I installed the Pypes 2.5 system on my 72 C10 and I'd say it is a well put together kit. It didn't work for me because I wanted my exhaust to go through the 2 holes in my aftermarket crossmember, since I want my truck quite low. I ended up just buying a builder kit and routed everything exactly where I needed mine to go. Another bonus I saved about 100 bucks. On a stock ride ride height truck the Pypes kit would be perfect.
Good luck
Brian

[68 P.O.S.]

I've been eyeing this one for awhile: https://www.summitracing.com/parts/mpe-16643

[70STOVEBOLT]

I used the Pypes SGT79 kit on my 70 and modified it to route through the TA crossmember (I used Chevelle headers). I only paid $335 for it though about 2 years ago. I still have about $465 in it with mufflers but I used stainless band clamps as the kit came with non-stainless saddle clamps. I am using cheap Thrush turbos right now but will ultimately probably go with Dynomax stainless turbos. I already had the cheap turbos and they were only a year old so I reused them. It’s not loud enough for me with full tailpipes so I put electric cutouts on as well. The Pypes kit is good quality my only complaint is the clamps. It does come with stainless hangers.

[71cheyennesuperlongb]

I just got summitts hot rod builders kit on page 58 of their christmas catalog. 2 1/2 stainless steel kit $179 dollars! Must be a typo but they honered the price. This was 2 or 3 weeks ago.

[71cheyennesuperlongb]

SORRY guys.I said summit in my previous post.I meant JEGS christmas and new year catalog.Page 58 Muscle car exhaust kits Part no.555-30521. I shouldnt try to do things from memory.Sorry about any confusion.

[19stepSide72]

Any possible way to post picture of jegs Catalog with that ad. I don’t have one. Thanks. Or PM it to me.

[71cheyennesuperlongb]

If I can get my daughter to come over I will have her post a pic. old fart almost computer stupid! It is a 123 page bi monthly style with a chromed out sbc;blower;2 four barrel Edelbrock carbs with a shotgun breather on the cover.If you look on their website its $379..When I called to place my order I asked Why so much.The guy asked what page I saw that price.Page 58-x.Silence for a few seconds then come back with cheaper price.I just told him the new Christmas catalog.

[tj1970cst]

I bought the kit from speedway.

I used stainless mufflers and stainless band clamps. I think they sell a stainless kit. If they dont, Ebay does.

[littlehopper]

Sorry, had some trouble with the DD and my parents house. Thanks for the info. Looking like may not be best for me as looking to lower about 3-4” all around.