outer wheel bearings in rear dif. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

from_the_edge · 06-12-2004, 04:38 PM

First thing is can I get my shafts spray welded where it is showing signs of wear at the bearing and second thing is how do you get those bearings out of there ?

Thanks in advance

Gordo · 06-12-2004, 04:56 PM

You can use a slide hammer style puller to remove the bearing. You can also replace those bearings with a repair bearing from NAPA without repairing the axles. The replacement bearing uses a different wear area on your original axles. The Napa part number is R1559. This is for a 1/2 ton truck.
Also, this repair bearing eliminates the need for a seal, it's all one piece bearing and seal.

cableguy0 · 06-12-2004, 06:38 PM

once the axle is worn into you need to either replace the axles or get the repair bearing as stated

06-12-2004, 04:38 PM	#1
from_the_edge Registered User Join Date: Apr 2003 Location: St.Adolphe Manitoba Posts: 70	outer wheel bearings in rear dif. First thing is can I get my shafts spray welded where it is showing signs of wear at the bearing and second thing is how do you get those bearings out of there ? Thanks in advance __________________ 71 Chevy 1/2 ton work in progress 96 Sunfire 03 Montana the truck is a mess but good times ahead

06-12-2004, 04:56 PM	#2
Gordo Registered User Join Date: Jan 2001 Location: Killingworth, CT. USA Posts: 3,378	You can use a slide hammer style puller to remove the bearing. You can also replace those bearings with a repair bearing from NAPA without repairing the axles. The replacement bearing uses a different wear area on your original axles. The Napa part number is R1559. This is for a 1/2 ton truck. Also, this repair bearing eliminates the need for a seal, it's all one piece bearing and seal. __________________ 1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. Last edited by Gordo; 06-12-2004 at 05:04 PM.

06-12-2004, 06:38 PM	#3
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	once the axle is worn into you need to either replace the axles or get the repair bearing as stated __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.