Remanufactured Engine ID Tag - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoNeck · 11-19-2019, 09:19 PM

I just bought a C10 that had this Remanufactured ID Tag attached to the driver side of the engine block under the exhaust ports. Sorry for the bad photo. I know the engine runs like new and was told that it was a 350, but have no paperwork.

Does anyone recognize the tag? It would help if I knew what company (Jasper, Douglas, Blueprint Engines, AutoZone, etc) built the engine. Then I could call them with the serial number and maybe determine if it is a 350.

I understand a company called Blueprint Engines use a red and silver ID tag, but they won't reply back to me.

Any help would be appreciated. Thanks

GASoline71 · 11-19-2019, 09:21 PM

No casting number on the drivers side bellhousing flange?

Gary

**Rickysnickers** · 11-19-2019, 09:41 PM

I recently bought a Blueprint Engine and it had the same type of tag, in the same location. I'd call them and see if they can give you any info. Sorry, I just read the last sentence. I'd still try calling them.

Scott Liggett · 11-20-2019, 10:45 AM

Hey this is Scott from BluePrint. I checked around and we don’t see any incoming emails regarding this, so sorry if we missed them. As far as this being one of ours, its been a long time since any of our tags have said “REMAN” on them, as we’re now pretty much a performance engine company. I checked both 218937 and 278937 in our database, and both are 4 cylinders, so pretty safe to say it is not ours. If I’m reading that number incorrectly, please call us to check it out further.

palallin · 11-20-2019, 11:21 AM

I think the second digit is a "4."

NoNeck · 11-20-2019, 11:23 AM

Quote:

No casting number on the drivers side bellhousing flange?

Being an old guy, I can't bend over the engine enough to read the casting number. Thanks

Scott, thanks for responding. Not sure why you didn't get my email. I will keep looking.

POP

Scott Liggett · 11-20-2019, 12:08 PM

Quote:

Originally Posted by palallin

I think the second digit is a "4."

For the serial number 248937, I show that was a 1986 era 305 Chevy. It's a stock replacement engine that we discontinued some years ago. This particular engine was sold in July of 2007. That is assuming it was our engine.

Cylinder head and block casting numbers would confirm this.

54blackhornet · 11-20-2019, 03:33 PM

Amazing detective work !

RustyPile · 11-21-2019, 05:56 PM

"Runs like new??? Everybody knows there's an obvious difference in the "acceleration G force" between a 305 and a 350...

**truckster** · 11-21-2019, 07:52 PM

Quote:

Originally Posted by Scott Liggett

For the serial number 248937, I show that was a 1986 era 305 Chevy. It's a stock replacement engine that we discontinued some years ago. This particular engine was sold in July of 2007. That is assuming it was our engine.

Cylinder head and block casting numbers would confirm this.

This is what customer service looks like. Thanks, Scott.

11-19-2019, 09:19 PM	#1
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Remanufactured Engine ID Tag I just bought a C10 that had this Remanufactured ID Tag attached to the driver side of the engine block under the exhaust ports. Sorry for the bad photo. I know the engine runs like new and was told that it was a 350, but have no paperwork. Does anyone recognize the tag? It would help if I knew what company (Jasper, Douglas, Blueprint Engines, AutoZone, etc) built the engine. Then I could call them with the serial number and maybe determine if it is a 350. I understand a company called Blueprint Engines use a red and silver ID tag, but they won't reply back to me. Any help would be appreciated. Thanks Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

11-19-2019, 09:41 PM	#3
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,058	Re: Remanufactured Engine ID Tag I recently bought a Blueprint Engine and it had the same type of tag, in the same location. I'd call them and see if they can give you any info. Sorry, I just read the last sentence. I'd still try calling them.

11-20-2019, 10:45 AM	#4
Scott Liggett Registered User Join Date: Dec 2014 Location: Kearney, NE Posts: 30	Re: Remanufactured Engine ID Tag Hey this is Scott from BluePrint. I checked around and we don’t see any incoming emails regarding this, so sorry if we missed them. As far as this being one of ours, its been a long time since any of our tags have said “REMAN” on them, as we’re now pretty much a performance engine company. I checked both 218937 and 278937 in our database, and both are 4 cylinders, so pretty safe to say it is not ours. If I’m reading that number incorrectly, please call us to check it out further.

11-20-2019, 11:21 AM	#5
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,238	Re: Remanufactured Engine ID Tag I think the second digit is a "4." __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.

11-20-2019, 03:33 PM	#8
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,391	Re: Remanufactured Engine ID Tag Amazing detective work ! __________________ 71 C-20 07 Magnum RT AWD

11-21-2019, 05:56 PM	#9
RustyPile Registered User Join Date: Dec 2017 Location: Elkhart, Texas Posts: 1,841	Re: Remanufactured Engine ID Tag "Runs like new??? Everybody knows there's an obvious difference in the "acceleration G force" between a 305 and a 350...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.