The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Tools, Shops and Shop Safety

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-17-2019, 05:22 PM   #1
Scott2
Registered User
 
Join Date: Mar 2015
Location: Castle Rock, CO
Posts: 534
Smile New Shop for Scott

We decided last summer to build a "retirement" home out east a bit on 5 acres. The builder just poured the foundation this week so we're about 4 months out for the house to be done, depending on weather. It'll be a 2500 sqft 3 bedroom ranch with a 3 car 24' x 36' garage and a full unfinished basement. The pics are the house foundation and the mountain is Pikes Peak about 60 miles away in Colorado Springs. That's the view from the back of the house.

I'm also looking at a detached garage and met with a good, local builder (he has a '53 Ford truck but it has Chevy running gear so he's mostly OK) this morning to walk the lot. I do not want a giant building with a door on one end for a humongous John Deere combine or a semi-truck (LOVE your shop Doug but I don't live on a farm or have giant equipment!) , I really just want a good sized, garage style structure that looks a lot like a bigger garage, so he's estimating out a 30' x 50' building, ~10' walls and ceiling height, with one bay set up with 12' ceiling and thickened floor for a 2 post lift.

It'll have a standard concrete foundation (vs something like a pole barn), 2" X 6" stick framed walls, trusses and fiberglass shingle roof, hardy plank siding and a short fake rock facing ~3 feet up the front side (have to match the house in materials, building style and paint), a couple of 8' x 16' standard insulated garage doors evenly spaced on the long side, and most likely be set up for radiant floor heating with insulation under the slab and plastic pipe run in the concrete. One short side will face due south straight at the mountain so I'll have a single rollup door there to open on a small seating area and enjoy the view.

Phase 1 is the foundation and structure with a 125 amp panel, one light, one receptacle, no insulation, no drywall.

After we recover from the move and all the misc stuff that comes with a new place, I can work on the rest and get it finished up. That's the plan so far.
Attached Images
     
__________________
Scott

______________
my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979
Scott2 is offline   Reply With Quote
Old 11-17-2019, 10:46 PM   #2
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
Re: New Shop for Scott

Great view!
I’d love to be able to build a new place...but that would put me further away from work and some family( I’d have to go 20+ miles south to be able to afford 3-5 acres.
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 11-18-2019, 08:17 AM   #3
PGSigns
Senior Member
 
PGSigns's Avatar
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
Re: New Shop for Scott

Great view. I would do the shop with 12 foot ceilings so you have room for a lift. They make lift so much easier.
Jimmy
__________________
60 to 66 Chevy and GMC window decals
http://67-72chevytrucks.com/vboard/s...d.php?t=661131
Good friends, good food and a hotrod what else do you need?
1966 BBW long fleet Daily driver
1965 BBW short fleet Sold and going to a good home
1965 Suburban
2003 3500 Duramax
2005 Ultra Classic
PGSigns is offline   Reply With Quote
Old 11-18-2019, 11:36 AM   #4
Scott2
Registered User
 
Join Date: Mar 2015
Location: Castle Rock, CO
Posts: 534
Re: New Shop for Scott

Quote:
Originally Posted by PGSigns View Post
Great view. I would do the shop with 12 foot ceilings so you have room for a lift. They make lift so much easier.
Jimmy
The plan is to have one bay set up with a 12' ceiling and a lift - I'm thinking I leave the rest at 10' so it's all easier to heat.
__________________
Scott

______________
my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979
Scott2 is offline   Reply With Quote
Old 11-23-2019, 11:22 AM   #5
Scott2
Registered User
 
Join Date: Mar 2015
Location: Castle Rock, CO
Posts: 534
Re: New Shop for Scott

Update - 1st estimate is in for the shop. Note the pic is just a stock garage shot, not exactly like I hope mine will be but pretty directional.

Actually, the same guy gave me a ballpark estimate before which was ~$30/sq ft for a pole barn 30x50x12 so roughly $45k which is starting to be more interesting...

Estimate is for 30x50x12, 2x6 walls, trussed ceiling, two 16x8 insulated garage doors, one 8x8 insulated rollup door, one man door, and four windows, hardy-plank siding plus a short rock facing along the front to match the house, house matching trim and roofing (fiberglass shingles), poured concrete foundation and floor with heat pipes. Site is pretty flat so dirt work is minor.

This is a lot more than I was thinking, esp since the extras will add $20k plus. I know it's a heated, 1500 sq ft building a lot like a house but ~$100k for a big garage is a giant budget hit. Does this seem right or is it far off?
Attached Images
  
__________________
Scott

______________
my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979
Scott2 is offline   Reply With Quote
Old 11-25-2019, 10:47 PM   #6
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: New Shop for Scott

Congrats Scott .....100k for a shop?...wow!!!!......does sound high...but isnt everything in Colorado?.....in more ways than one now..haha
..sure is a nice view you got...
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 11-26-2019, 09:08 PM   #7
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
Re: New Shop for Scott

You could probably go with a steel building at about half that. Mueller is around my area and has great products
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 11-29-2019, 09:07 AM   #8
95 S_Trucker
Registered User
 
95 S_Trucker's Avatar
 
Join Date: Oct 2009
Location: .
Posts: 2,187
Re: New Shop for Scott

That price quote doesn’t seem too outrageous

We just put a 26x48, stick built with block/brick foundation, 2 18’x8’ garage doors, 2 people doors, 6 windows. I did the electric, and no insulation/finishing on the inside. Total was right around 50,000. We know a steel pole building would be 1/3 the price, but we wanted it to look like the other buildings on the property.
95 S_Trucker is offline   Reply With Quote
Old 11-29-2019, 04:59 PM   #9
Scott2
Registered User
 
Join Date: Mar 2015
Location: Castle Rock, CO
Posts: 534
Re: New Shop for Scott

Quote:
Originally Posted by mongocanfly View Post
Congrats Scott .....100k for a shop?...wow!!!!......does sound high...but isnt everything in Colorado?.....in more ways than one now..haha
..sure is a nice view you got...
Yeah - it’s expensive here! Maybe a fair price but I just don’t want to spend that much.
__________________
Scott

______________
my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979
Scott2 is offline   Reply With Quote
Old 11-29-2019, 05:00 PM   #10
Scott2
Registered User
 
Join Date: Mar 2015
Location: Castle Rock, CO
Posts: 534
Re: New Shop for Scott

Quote:
Originally Posted by Clyde65 View Post
You could probably go with a steel building at about half that. Mueller is around my area and has great products
I could go steel frame, or pole barn style, but the outside has to have the materials, style, and colors have to match the house.
__________________
Scott

______________
my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979
Scott2 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com