Interior heater removal. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Daron65 · 12-28-2019, 11:38 AM

I have decided to install the Jegs heater in my 71 C20. At some future time (when funding permits) i plan on installing a heat and air system.
Before i head out and start ripping stuff out, i was wondering if anyone has words of advice? The underhood parts of the heating system has already been removed.
Any help would be greatly appreciated.

Thank you. Daron

Andy4639 · 12-28-2019, 02:43 PM

If the heater box under the hood is gone the inside is a breeze to remove. A couple of screws and it's done pluse the wiring but you can take it and clip it off are bundle it up up under the dash someplace out of the way.

Daron65 · 12-28-2019, 08:04 PM

Thank you. After using some unusual words, and calming my shaking hands, I was able to get all of the interior parts removed. Found a good many dead wasps. Lol. Started to mount the Jegs heater. The sun went down, so i stopped. Will hopefully finish this week.

12-28-2019, 11:38 AM	#1
Daron65 Registered User Join Date: Oct 2019 Location: Monaca, PA Western PA Posts: 93	Interior heater removal. I have decided to install the Jegs heater in my 71 C20. At some future time (when funding permits) i plan on installing a heat and air system. Before i head out and start ripping stuff out, i was wondering if anyone has words of advice? The underhood parts of the heating system has already been removed. Any help would be greatly appreciated. Thank you. Daron __________________ 1971 Chevrolet C20, Blueprint 355. Holly Street Avenger 430HP. Turbo 350 1952 Chevrolet Deluxe. Stock. True survivor with 1 paint job 1953 Buick Special. GM 355. Just a good smooth engine.

12-28-2019, 02:43 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Interior heater removal. If the heater box under the hood is gone the inside is a breeze to remove. A couple of screws and it's done pluse the wiring but you can take it and clip it off are bundle it up up under the dash someplace out of the way. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-28-2019, 08:04 PM	#3
Daron65 Registered User Join Date: Oct 2019 Location: Monaca, PA Western PA Posts: 93	Re: Interior heater removal. Thank you. After using some unusual words, and calming my shaking hands, I was able to get all of the interior parts removed. Found a good many dead wasps. Lol. Started to mount the Jegs heater. The sun went down, so i stopped. Will hopefully finish this week. __________________ 1971 Chevrolet C20, Blueprint 355. Holly Street Avenger 430HP. Turbo 350 1952 Chevrolet Deluxe. Stock. True survivor with 1 paint job 1953 Buick Special. GM 355. Just a good smooth engine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.